|
Dual Band
SGH-P107
User Manual
Please read this manual before operating your phone,
and keep it for future reference.
Printed in Korea
GH68-04531A
English . 04/2004 . Rev. 1.0
Samsung Telecommunications America (STA),
Inc.
U. S. Headquarters:
1301 E. Lookout Drive
Richardson, TX 75082
Tel: 972-761-7000
Fax: 972-761-7001
Customer Care Center:
1601 E. Plano Parkway
Suite 150
Plano, TX 75047
Tel: 888-987-HELP (4357)
Fax: 972-761-7501
Internet Address: http://www.samsungusa.com/wireless
©2003 Samsung Telecommunications America. All rights
reserved. No reproduction in whole or in part allowed
without prior written approval. Samsung is a registered
trademark of Samsung Electronics America, Inc. and its
related entities.
1
2
3
4
Appendix B: Guide to Safe and Responsible Wire-
5
Appendix C: Consumer Update on Wireless Phones
6
Important Safety Precautions
Read these guidelines before using your wireless phone.
Failure to comply with them may be dangerous or illegal.
For more detailed safety information, see “Health and
Safety Information”.
Road Safety at All Times
Do not use a hand-held phone while driving; park the
vehicle first.
Switching Off When Refueling
Do not use the phone at a service station or near fuels or
chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them in an
aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment. Follow any
regulations or rules in force.
Interference
All wireless phones may be subject to interference, which
could affect its performance.
Special Regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden to
use it, or when it may cause interference or danger (in a
hospital for example).
Important Safety Precautions
7
Radio Frequency Exposure
The design of this phone complies with FCC (of the U.S.
government) requirements relating to radio frequency (RF)
exposure. To maintain compliance with these
requirements, use only Samsung-supplied or approved
accessories. Use of non-approved accessories may
violate the requirements.
Sensible Use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone is
switched on.
Emergency Call
Ensure the phone is turned on and in service.
Enter the emergency number for your present location, the
press <SEND>. If certain features are in use, deactivate
those features before you can make an emergency call.
Give all necessary information as accurately as possible.
Accessories and Batteries
Use only Samsung-approved accessories and batteries.
Qualified service
Only qualified service personnel may install or repair your
phone.
For more detailed safety information, see “Health and
Important Safety Precautions
8
10 Driver Safety Tips
Your wireless telephone gives you the powerful ability to
communicate by voice - almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features such
as speed dial and redial. If available, these features
help you to place your call without taking your attention
off the road.
2. When available, use a hands free device. If possible,
add an additional layer of convenience and safety to
your wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without removing
your eyes from the road. If you get an incoming call at
an inconvenient time, if possible, let your voice mail
answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet,
snow, ice, and even heavy traffic can be hazardous.
10 Driver Safety Tips
9
5. Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car will
be stationary. If you need to make a call while moving,
dial only a few numbers, check the road and your
mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make people
you are talking with aware you are driving and suspend
conversations that have the potential to divert your
attention from the road.
8. Use your wireless phone to call for help. Dial 9-1-1
or other local emergency number in the case of fire,
traffic accident or medical emergencies. Remember, it
is a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as
you would want others to do for you.
10.Call roadside assistance or a special non-
emergency wireless assistance number when
necessary. If you see a broken down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic
accident where no on appears injured, or a vehicle you
10 Driver Safety Tips
10
know to be stolen, call roadside assistance or other
special non emergency number.
“The wireless industry reminds you to use your phone
safely when driving.”
For more information, please call 1-888-901-SAFE, or visit
our website www.wow-com.com™
Provided by the Cellular Telecommunications & Internet
Association
10 Driver Safety Tips
11
10 Driver Safety Tips
12
● Simple hands-free kit
● Standard battery
● Car power charger
● Leather case
Unpacking
14
Key
Description
In the Menu Mode, scroll through the
menu options and phonebook
memory.
In idle mode, allow you to access your
favorite menu options directly (for
more information on shortcuts, see
In the menu facility, returns to the
previous menu level and select the
current menu respectively.
When entering text, move the cursor
left and right respectively.
In idle mode, allows you to access
your favorite menu options directly (for
more information on shortcuts, see
Your Phone
16
Key
Description
Perform the functions indicated by the
text above them (on the bottom line of
the display).
(soft keys)
In idle mode, launches the WAP
Browser directly.
Deletes characters from the display.
In the menu facility, returns to the
previous menu level.
Makes or answers a call.
When held down in idle mode, recalls
the last numbers dialed or received.
In the menu facility, selects a menu
function or stores information that you
have entered (such as a name) in the
phone or SIM memory.
Ends a call. Also switches the phone
on and off when held down for 2 or
more seconds.
In the menu facility, returns to the idle
mode and cancels your input.
Your Phone
17
Key
Description
When held down for 3 or more
seconds in idle mode, accesses your
voice mail.
Enter numbers, letters and some
special characters.
(on the side of the phone)
During a call, adjust the earpiece
volume.
In idle mode, adjust the key volume.
In the menu facility, scroll through the
menu options and phone book
memory.
Your Phone
18
Display Layout
The display is comprised of three areas.
Area
Description
First line
Displays various icons (see
Middle lines
Last line
Display messages, instructions
and any information that you
enter (number to be dialed, for
example).
Shows the functions currently
assigned to the two soft keys.
Your Phone
19
Icons
Icon
Description
Shows the received signal strength. The
greater the number of bars, the better the
signal strength.
Appears when a call is in progress.
Appears when you are connected to the
GPRS network.
Appears when the Silent mode is active
or you set the Alert Type menu option, so
that the phone vibrates when you receive
Appears when a new text message has
been received.
Appears when a new voice mail message
has been received.
Appears when you are entering text to
indicate the current text input mode.
Your Phone
20
Icon
Description
Appears when you set the alarm.
Shows the level of your battery. The more
bars you see, the more power you have
left.
Appears when the Mute mode is active.
Backlight
The display is illuminated by a backlight. When you press
any key, the backlight illuminates. It turns off if no key is
pressed within a given period of time, depending on the
Back Light menu option.
To specify the length of time for which the backlight is
active, set the Back Light menu option (Menu 6.7.2).
You can also set the phone to use the backlight only
during a specified period time, via the Auto Light menu
option.
External Display
Your phone has an external display on the cover. It
indicates that you have an incoming call or a message,
and notifies you when you set an alarm at the specified
time.
Your Phone
21
Main Screen Display
Your phone has a main screen display. It indicates that you
have an incoming call or a message, and notifies you at
the specified time when you set an alarm.
Service Light
The service light is above the external display on the folder
cover. It flashes when services are available on the phone.
To activate or deactivate use of the service light, set the
Service Light menu option (Menu 6.7.4).
Your Phone
22
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, and any optional
services available.
Note: The plug-in SIM card and its’ contacts can be easily damaged by
scratches or bending, so be careful when handling, inserting or removing the
card. Keep all SIM cards out of reach of small children.
11.If necessary, turn the phone off by holding down the
key until the power-off image is displayed.
12.Remove the battery. To do so:
● Press down the catch above the battery and hold it in
this position.
● Slide the battery and lift it away, as shown.
13.Slide the SIM card into the SIM card holder so that the
holder locks the card in position. Make sure that the
Getting Started
23
notched corner is at top left and the gold contacts of
the card face into the phone.
Note: When you need to remove the SIM card, slide it, as shown, and take it
out of the holder.
Getting Started
24
14.Place the battery back, taking care to match the tabs
on the battery with the grooves on the phone.
15.Slide the battery towards the top of the phone until it
clicks into place. Make sure that the battery is properly
installed before switching on the power.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. A
travel adapter is provided with your phone. Use only
approved batteries and chargers. Ask your local Samsung
dealer for further details.
Getting Started
25
The phone can be used while the battery is charging, but
this will cause the phone to charge more slowly.
Note: You must fully charge the battery before using your phone for the first
time. A discharged battery is fully recharged in approximately 160 minutes.
1. With the battery in position on the phone, connect the
lead from the travel adapter to the bottom of the phone.
2. Connect the adapter to a standard AC wall outlet.
3. When charging is finished, disconnect the adapter from
the power outlet and from the phone by pressing the
gray tabs on both sides of the connector and pulling out
the connector.
Getting Started
26
Note: Do not remove the battery from the phone without unplugging the
adapter while it is charging. If you do this, the phone may be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk
time remain, you will hear a warning tone and a message
will be repeated at regular intervals on the display:
When the battery becomes too weak for the phone to
operate, it switches off automatically.
Switching the Phone On/Off
1. Open the folder.
2. Hold down the
key until the phone turns on.
3. If the phone asks for a password, key in the password
and press the OK soft key. The phone password is
factory set to 00000000. For further details, see “Phone
Getting Started
27
4. If the phone asks for a PIN, key in the PIN and press
The phone searches for your network and when it finds it,
the idle screen, illustrated below, appears on each display.
Now, you can make or receive a call.
Note: The display language is factory set to English. To change the language,
use the Language menu option (Menu 6.5).
5. To turn off the phone, hold down the
power-off image is displayed.
key until the
Getting Started
28
Call Functions
Making a Call
When the idle screen is displayed, key in the area code
and phone number, and press the
key.
Note: If you have checked the Auto Redial option in the Extra Settings menu
(Menu 6.8.1), the number is redialed automatically up to ten times when the
person does not answer the call or is already on the phone; see “Extra
Settings” on page 107 for further details.
Making a International Call
1. Press and hold down the
key.
The + character appears.
2. Key in the country code, area code and phone number
and press the key.
Call Functions
29
Correcting the Number
To clear...
Then...
The last digit
displayed
Press the
key.
Any other
digit in the
number
Press the
or
key until the
cursor is immediately to the right
of the digit to be cleared. Press
the
key. You can also insert
a missing digit simply by
pressing the appropriate key.
The whole
display
Hold down the
key for more
than one second.
Ending a Call
When you have finished your call, briefly press the
key.
Redialing the Last Number
The phone stores the numbers you dialed, received or
missed.
To recall any of these numbers, proceed as follows.
1. If you have typed any characters on the display, clear
the display by holding down the
one second.
key for more than
Call Functions
30
2. Press the
key to display a list of the last numbers in
the order in which the calls were made.
3. Use the
and
keys to scroll through the
numbers until the required number is highlighted.
4.To...
Then...
dial the number
highlighted
press the
key.
edit the number
highlighted
press the Options soft
key select Edit Number
option and change the
number as required.
delete the number press the Options soft
highlighted key and select Delete.
Making a Call from the Phonebook
You can store frequently-dialed phone numbers with a
name in the SIM card or the phone memory, using the
phonebook. You then simply select the required name to
recall the associated number. For further details on the
Adjusting the Volume
During a call, if you want to adjust the earpiece volume,
use the UP and Down keys on the left side of the phone.
Press the
key to increase and the
key to decrease
the volume.
Call Functions
31
In idle mode, you can adjust the key volume using the
and keys.
Answering a Call
When somebody calls you, the phone rings and the
following screen appears on each display.
If stored in your phonebook, the caller’s phone number or
name displays.
1. Open the folder and press the
key or the Accept
soft key to answer the incoming call.
If the Anykey Answer option in the Extra Settings menu
(Menu 6.8.3) is checked, you can press any key to answer
a call except for the
key and the Reject soft key.
If the Active Folder option in the Extra Settings menu is
checked, you can answer the call simply by opening the
folder.
Call Functions
32
Note: To reject an incoming call, press and hold the volume keys on the left
side of the phone before opening the folder.
2. End the call by pressing the
key.
Note: You can answer a call while using the phonebook or menu features.
Viewing Missed Calls
If you are unable to answer a call, you can find out who
was calling you, provided that this service is available to
you.
The number of missed calls is displayed on the idle screen
immediately after a call was missed.
To view the missed call immediately
1. Open the folder and press the View soft key.
The number corresponding to the most recent missed call
is displayed, if available.
To....
Then press the...
scroll through the
missed calls
or
key.
call the number
displayed
key.
Editing a Missed Call Number
If the number corresponding to the missed call is not
available, the Edit Number option is not displayed.
1. Press the Options soft key.
Call Functions
33
2. Press the
or
key to highlight the Edit option.
3. Press the Select soft key.
4. Change the number as required. Press the Save soft
key. If no change is required press the Exit soft key.
To...
Then press the...
call the number
key.
store the number
Save soft key and enter the
name and location required
(for further details, refer to
Deleting a Missed Call
1. Press the Options soft key.
2. If necessary, press the
or
key to highlight the
Delete option.
3. Press the Select soft key to go to the Options menu.
You can press the
Call feature.
key at any time to exit the Missed
Note: You can access the Missed Call feature at any time by selecting the
Call Functions
34
Switching Quickly to the Silent Mode
The Silent Mode is convenient when discretion is required
and you a wish to stop the phone from making any noise,
in a theater for example.
In idle mode, to switch your phone quickly to the silent
mode, simply press and hold down the
“Silent Mode” message and vibration icon
displayed.
key until the
are
In the silent mode, your phone changes the sound settings
as follows.
Option
New Setting
Alert Type (Menu 5.4)
Vibration
Keypad Tone (Menu 5.5) Off
Folder Tone (Menu 5.7) Off
Power On/Off (Menu 5.8) Off
Extra Tones (Menu 5.9) Off
To exit the silent mode and reactivate the previous Sound
Settings, press and hold the key again until “Exit
Silent Mode” appears. The vibration icon ( ) is no longer
displayed.
Call Functions
35
Call Functions
36
Selecting Functions and Options
Your phone offers a set of functions that allow you to
customize your phone. These functions are arranged in
menus and sub-menus, accessed via the two soft keys
marked
and
. Each menu and sub-menu allows
you to view and alter the settings of a particular function.
The roles of the soft keys vary according to the current
context; the label on the bottom line of the display just
above each key indicates its current role.
Example:
Press the left
soft key to
access the
main menu
mode.
Press the right
soft key to
access the
Phonebook
feature.
Selecting Functions and Options
37
To view the various functions/options available and select
the one required, proceed as follows.
1. Press the appropriate soft key.
To...
Then press the...
select the:
Select soft key or
• Function displayed
or
the
key.
• Option highlighted
view the next function
or highlight the next
option in a list
key or
the left side of the
phone.
key on
move back to the
previous function or
option in a list
key or
on the left side of the
phone.
key
move back up one level
in the structure
key,
soft key
or
key.
exit the structure
without changing the
settings
key.
In some functions, you may be asked for a password or
PIN. Enter the required code and press the OK soft key.
Selecting Functions and Options
38
Example: Setting the Display Language
1. When the idle screen is displayed, press the Menu soft
key to access the menus.
2. Scroll through the menus until you reach the Phone
Settings menu, by pressing the
or
key.
3. To select the Phone Settings menu, press the Select
soft key or the key.
Note: If the menu name is too long for the display, it will scroll when highlighted.
4. Scroll through the sub-menus until you reach the
Language sub-menu, by pressing the
key.
or
5. To view the languages available, press the Select soft
key or the key. The current setting is highlighted.
6. Scroll through the list of languages until the appropriate
one is highlighted, by pressing the
or
key.
7. Press the Select soft key or the
key to confirm your
selection.
Press the
or key twice to exit the menu structure.
Selecting Functions and Options
39
Selecting Functions and Options
40
Phonebook
You can store phone numbers and their corresponding
names in the memory of your SIM card. In addition, you
can store up to 500 numbers in the phone memory. The
SIM card and phone memories, although physically
separate, are used as if they were a single entity, called
the Phonebook.
Storing a Number with a Name
There are two ways to store a number:
1. Using the Save soft key in idle mode
2. Using the New Entry option in the Phonebook menu
Storing a Number in Idle mode
As soon as you start to enter a number, Save appears
above the left soft key to allow you to store the number in
the phonebook.
1. Key in the number to be stored.
Note: If you make a mistake while entering a number, correct it using the
2. When you are sure that it is correct, press the Save soft
key.
3. Select an entry type to identify the category of number
to be stored. Three categories are available:
●Mobile Number
●Work Number
Phonebook
41
●Home Number
4. To select the category, press the
or
key, followed
by the Select soft key.
5. Enter a name and press the OK soft key.
The maximum length of a name depends on your SIM
card. For information on how to enter characters, see
The phone now displays the first free location in the last
memory used to save a number and name. If that memory
is full, the first free location in the other memory is
displayed.
6. Press the right soft key, labeled To Card or To Phone
to toggle between the phone and card memories.
Note: If you change phones, any numbers stored in your SIM card memory will
automatically be available with the new phone, whereas any numbers stored in
the phone memory must be restored.
7. If you do not want to save the number and name in the
suggested location, press the
key to clear the
location number and enter your preferred location by
pressing the number keys.
8. Press the OK soft key to store the name and number.
9. After storing, the phone displays the phonebook entry
or name just created.
Phonebook
42
To...
Then press the...
Use the entry options
Options soft key.
Return to the idle screen
key.
Storing a Number Using the Phonebook Menu
1. When the idle screen is displayed, press the Name soft
key.
2. Scroll to New Entry by pressing the
or
key
and press the Select soft key.
3. Select an Entry Type to identify the category of the
number to be stored. The following four options are
provided:
● Mobile Number
● Work Number
● Home Number
● E-mail Address
Note: The E-mail icon is available in this step. It allows you to save an E-mail
address instead of a phone number.
number.
Phonebook
43
Using Phonebook Entry Options
While accessing any phonebook entry, press the Options
soft key to access the options for the entry.
To...
Then press the...
Select the
highlighted option
Select soft key or the
key.
Highlight a
or
key until the
different option
required option is
highlighted.
The following options are available.
● Paste: allows you to paste the selected number into
the normal dialing mode. Use this option to dial a
number similar to one in the phonebook, a different
extension in the same office, for example.Use the
key to change the number as required; refer to
“Correcting the Number” on page 30 for further
details. When you are ready to dial, press the
key.
● Edit: allows you to edit the phonebook entry. Select
One Entry to change one number in the selected
name. If you change the name, the number is saved
separately. Select All Entry to change the name of
the entry.
● Erase: allows you to erase the selected name and
number from the phonebook. You are asked to
Phonebook
44
confirm that you wish to erase the name and number
by pressing the Yes soft key.
● Copy: allows you to copy the selected number to
another location. Use this option to store a number
similar to one already in memory; once copied, edit
the number and store it in the Phonebook.
● Caller Group: allows you to assign the entry to a
caller group so that the phone alerts you in a
particular way when the corresponding person calls
you. Select one of the ten groups available. To remove
an entry from a group, select the No Group option. For
more information on how to change caller group
● Add Entry: allows you to add a new number in
a different category (mobile, office, home or E-mail) to
the currently selected name. A phonebook entry or
name can contain up to four numbers, one in each
category.
Searching for a Number in the Phonebook
After storing numbers in the phonebook, you can search
for them in two ways: by name and by caller group.
Searching for a Number by Name
1. When the idle screen is displayed, press the Name soft
key.
2. Press the Select soft key when Search is highlighted.
You are asked to enter a name.
Phonebook
45
3. Enter the first few letters of the name that you wish to
find.
The phonebook entries are listed, starting with the first
entry matching your input. This entry is also highlighted.
4.
To...
Then press the...
View the highlighted entry
Select a different entry
View soft key.
or
key until the
required entry is highlighted.
Look for a name starting
with a different letter
To clear previously entered
text, press the
key.
5. Once you have found the required entry, press the
key to dial the number, or press the Options soft key to
access the phonebook entry options; for further details,
Searching for a Number by Caller Group
1. When the idle screen is displayed, select the Name soft
key. Scroll to Group Search by pressing the
or
key and press the Select soft key. You are
asked to enter a group name.
2. Enter the first few letters of the group name that you
wish to find.
Phonebook
46
The caller groups are listed, starting with the first group
matching your input. The group is also highlighted.
3. Scroll to the required group by pressing the
or
key and press the View soft key.
The phonebook entries in the selected caller group are
listed.
4.
To...
Then press the...
View the highlighted View soft key.
entry
Select a different
entry
or
key until
the required entry is
highlighted.
5. Once you have found the required entry, press the
key to dial the number, or press the Options soft key to
access the phonebook entry options; for further details,
Editing a Caller Group
1. When the idle screen is displayed, select the Name soft
key.
2. Scroll to Group Edit by pressing the
or
key
and press the Select soft key.
3. Enter the start of the required group name or scroll
through the group list by pressing the or
key.
Phonebook
47
4. When the required group is highlighted, press the
Options soft key.
5. Select each option and change the settings, as
required. The following options are available.
● Call ring tone: allows you to select the ring tone to be
used when you receive a voice call from a person in
the group.
● SMS tone: allows you to select the ring tone to be
used when you receive a text message from a person
in the group.
● Graphic: allows you to select the graphic icon to be
displayed when you receive a voice call from a person
in the group.
● Group Name: allows you to assign a name to the
group; for further details on how to enter characters,
6. When you have finished, press the
or
key.
Speed-Dialing
Once you have stored phone numbers in the SIM card,
you can set up to eight speed-dial entries and then dial
them easily whenever you want, simply by pressing the
associated number key.
Setting Up Speed-Dial Entries
1. When the idle screen is displayed, select the Name soft
key.
Phonebook
48
2. Scroll to Speed Dial by pressing the
or
key
and press the OK soft key.
3. Select the key to which you wish to assign the speed-
dialing feature (keys
soft key.
to
) and press the OK
Note: If you have already assigned a number to the key, the Options soft key
replaces the OK soft key. Go to Step 6.
4. Select the required Phonebook entry from the list and
press the View soft key.
5. Select the required number if the entry has more than
one number, by pressing the
or
key and
press the Select soft key.
6. Once you have assigned a number to the selected key,
four options are available:
● Change: allows you to assign a different number to
the key.
● Erase: allows you to clear the setting so that no
number is assigned to the key.
● Erase All: allows you to clear the settings for all keys
so that no numbers are assigned to any of the keys.
● Number: allows you to view the number assigned to
the key.
7. When you have finished, press the
or
key.
Phonebook
49
Speed-Dialing from the Phonebook
To speed-dial the numbers assigned to keys
, press and hold down the appropriate key.
to
Note: Memory location 1 is reserved for your Voice Mail server number and
cannot be changed.
Checking Memory Status
You can check how many names and numbers are stored
in the phonebook (card and phone memories) or how
many free locations remain.
1. When the idle screen is displayed, select the Name soft
key.
2. Scroll to Memory Status option pressing the 6 or
key and press the Select soft key.
3. Press the
or
keys to view the number of
existing and remaining entries in the card and phone
memories.
Phonebook
50
Entering Text
When using your phone, you will often need to enter text.
For example, when storing a name in the phonebook,
creating your personal greeting or scheduling events in
your calendar. You can enter alphanumeric characters by
using your phone’s keypad.
You are provided with the following text input modes.
● T9 mode: This mode allows you to enter words with
only one keystroke per letter. Each key on the keypad
has more than one letter – when you press the
key once, J, K or L may be displayed. The T9 mode
automatically compares your keystrokes with an
internal linguistic dictionary to determine the correct
word, thus requiring far fewer keystrokes than the
traditional upper/lower-case character modes.
● Upper/lower-case character modes: These modes
allow you to enter letters by pressing the key labeled
with the required letter once, twice, three or four times
until the letter is displayed.
● Number mode: This mode allows you to enter
numbers.
● Symbol mode: This mode allows you to enter
symbols, such as punctuation marks.
Changing the Text Input Mode
When you are in a field that allows characters to be
entered, you will notice the text input mode indicator in the
display.
Entering Text
51
To select the...
Then press the
until...
soft key
T9 mode
displays.
displays
Upper-case
character mode
Lower-case
character mode
displays
Symbol mode
Number mode
displays.
displays
Using the T9 Mode
The T9 predictive text input mode allows you to key in any
character using single keystrokes. This text input mode is
based on a built-in dictionary.
1. When you are in the T9 predictive text input mode, start
entering a word by pressing keys
to
.
Press each key only once for one letter.
Example:to enter HELLO in the T9 mode,
press
,
,
,
and
.
The word that you are typing appears in the display. It may
change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
Entering Text
52
3. If the word is correct, start entering the next word.
4. Otherwise, press the or key
,
repeatedly to display alternate word choices for the
keys that you have pressed.
Example:both OF and ME have the sequence
. The phone displays the most commonly used
choice first.
and
5. Complete each word with a space by pressing the
key.
● To type words not found in the T9 mode, change the
text input mode to the upper/lower-case character
input mode.
● To enter full stops, hyphens or apostrophes, press the
key. The T9 mode applies grammar rules to
ensure that the correct punctuation is used.
● To change the case in the T9 mode, use the * key.
● You can move the cursor by using the
and keys.
To delete letters, press the
key. Press and hold
down the key to clear the display.
Using the Upper/Lower-Case Character Mode
Use the
to
keys to enter your text.
1. Press the key labeled with the required letter:
● Once for the first letter
● Twice for the second letter, and so on
Entering Text
53
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just wait for
a few seconds for the cursor to move right automatically, and then select the
next letter.
Refer to the table below for more information about the
characters available.
● To insert a space, press the
key.
● You can move the cursor by using the and keys.
To delete letters, press the key. Press and hold
down the key to clear the display.
Entering Text
54
Using the Symbol Mode
The Symbol mode enables you to insert symbols in a text
message.
Use the navigation keys to scroll to the desired symbol
and then press OK soft key to insert the highlighted
symbol into your message.
Using the Number Mode
The Number mode enables you to enter numbers in a text
message (a telephone number for example). Press the
keys corresponding to the required digits before manually
switching back to the appropriate text input mode.
Entering Text
55
Entering Text
56
Options During a Call
Your phone provides a number of control functions that
you can use during a call.
Putting a Call on Hold
You can place the current call on hold at any time. You can
make another call while you have a call in progress if this
service is supported by the network. Of these two calls,
one is active and the other is on hold and you can switch
between the calls.
To place a call on hold, simply press the Hold soft key.
You can reactivate the call whenever you want, by
pressing the Unhold soft key.
To make a call while you have a call in progress, proceed
as follows.
1. Key in the phone number that you wish to dial or look it
up in the phonebook.
2. Press the
key to dial the second call.
3. The first call is automatically put on hold.
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the Hold soft
key.
2. Make the second call in the normal way.
To swap between the two calls, simply press the Swap
soft key.
Options During a Call
57
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with the
other party.
When you have finished, end each call normally by
pressing the
key.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone off,
so that the other party cannot hear you.
Example: You wish to say something to another person in
the room but do not want the other party to hear you.
To switch the microphone off temporarily, use the following
steps:
1. Press the Options soft key.
2. If necessary, press the
option.
key to highlight the Mute
3. Press the OK soft key.
The other party can no longer hear you.
To switch the microphone back on, proceed as follows.
1. Press the Options soft key.
2. If necessary, press the
key to highlight the
Unmute option.
3. Press the OK soft key.
The other party can hear you again.
Options During a Call
58
Muting/Sending DTMF
These options allow you to turn the key tones off or on. If
the Mute keys option is selected, your phone does not
transmit the key tones. It allows you to press keys without
hearing any key tones during a call.
Note: To communicate with answering machines or computerized telephony
systems, the Send keys option must be selected.
Sending DTMF Tones
You can send the DTMF (dual tone multi-frequency) tones
corresponding to a number entered during a call.
This option is helpful when submitting a password or
account number to an automated system, like a banking
service.
To send DTMF tones, use the following steps:
1. When you are connected to the teleservice system,
press the Options soft key.
2. Press the
key to highlight the Send DTMF option.
3. Press the OK soft key.
4. Enter the number you wish to send and press the OK
soft key. The tones corresponding to the number
displayed are sent.
Note: You can also search for a number in the phonebook by pressing the
Name soft key. For a ore detailed description of the Phonebook feature, refer to
Searching for a Number in the Phonebook
You can search for a number in the phonebook during a
call.
Options During a Call
59
1. Press the Options soft key.
2. Press the
key to highlight the Phonebook option.
3. Press the OK soft key.
The phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the start of the name, the phonebook entries
are listed, starting with the first entry matching your input.
The entry is also highlighted.
5. To view the highlighted entry, press the View soft key.
For a more detailed description of the Phonebook feature,
Using the SMS Service
If you receive an SMS (Short Message Service) message
during a call, the message icon (
) flashes on the
display. The SMS Services option enables you to use this
feature.
Answering a Second Call
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and
you have set the Call Waiting menu option to Activate
incoming call by a call waiting tone.
To answer a call while you have a call in progress, proceed
as follows:
Options During a Call
60
1. Press the
key to answer the incoming call. The
first call is automatically put on hold.
2. To switch between the two calls, press the Swap soft
key.
To end a held call, press the Options soft key and select
the End Held Call option.
3. To end the current call, press the
key.
Making a Multiparty Call
A multiparty call is a network service that allows up to six
people to take part simultaneously in a multiparty or
conference call. For more information, contact your
service provider.
Setting up the Multiparty Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first
call is automatically put on hold.
3. To join the first participant to the multiparty call, press
the Options soft key and select the Join option.
4. To add a new person to the multiparty call, call the
person in the normal way, then press the Options soft
key and select the Join option.
You can add incoming callers by answering the call and
pressing Options, followed by Join. Repeat as required.
Options During a Call
61
Having a Private Conversation With One Participant
1. Press the Options soft key and choose the Select
one option.
The list of call participants appears.
2. Highlight the required person, by pressing the
key, followed by the Select soft key or the
key.
or
3. Select the Private option.
Now you can talk privately with that person. The other
participants can continue to converse with each other.
4. To return to the multiparty call, press the Options soft
key and select Conference.
All the multiparty call participants can now hear each
other.
Dropping One Participant
1. Press the Options soft key and choose the Select
one option.
The list of call participants appears.
2. Highlight the required person, by pressing the
key, followed by the Select soft key or the
key.
or
3. Select Remove.
The call is ended with that participant, but you can
continue to talk with the other participants.
Options During a Call
62
4. End the multiparty call by closing the phone or pressing
the key.
Options During a Call
63
Options During a Call
64
Using the Menus
The phone offers a range of functions that allow you to
tailor the phone to your needs. These functions are
arranged in menus and sub-menus.
The menus and sub-menus can be accessed by scrolling
with the navigation keys or by using the shortcuts.
Accessing Menu Functions by Scrolling
1. In idle mode, press the Menu soft key to access the
menu facility.
2. Scroll with the
main menu, Phone Settings for example. Press the
Select soft key or the key to enter the menu.
or
key to reach the required
3. If the menu contains any sub-menus, Language for
example, you can access them by scrolling with the
or
key and pressing the Select soft key.
If the menu that you have selected contains further
options, repeat the same procedure.
To...
Then press the...
Scroll through the
menus
or
use the
key or
and keys
on the left side of the
phone.
Confirm the chosen
setting
Select soft key or the
key.
Using the Menus
65
To...
Then press the...
Return to the previous
menu level
soft key.
Exit the menu without
changing the settings
key.
Accessing Menu Functions by Using Shortcuts
The menu items (menu, sub-menus and options) are
numbered and can be accessed quickly by using their
shortcut number. The shortcut number is shown in the
bottom right next to the
soft key on the display. Simply
press the Menu soft key and key in the required number.
Example: Accessing the Language option.
1. Press the Menu soft key.
2. Press
3. Press
for Phone Settings.
for Language.
The languages available are displayed directly.
Note: The numbers assigned to each menu option are indicated in the list on
the following page. They may not match the menu number on the phone. It
depends on the services supported by the SIM card.
List of Menu Functions
The following illustration shows the menu structure
available and indicates the:
● Number assigned to each option
● Page on which you can find a description of each
feature
Using the Menus
66
Note: If you use a SIM AT card that provides additional services, the SIM AT
menu (x) is displayed first when you press the Menu soft key to enter the menu
facility. For further details, refer to your SIM card documentation.
1. Text Messages
1.1 Inbox
1.2 Outbox
1.3 Write New
1.4 Templates
1.5 Settings
1.5.1 Setting 1
1.5.2 Setting 2
*
*
1.5.3 Common Setting
1.6 My Objects
1.6.1 My EMS Melody
1.6.2 My EMS Picture
1.6.3 My EMS Animation
1.6.4 Delete All
1.7 Delete All
1.8 Memory Status
1.8.1 SIM memory
1.8.2 PHONE memory
1.8.3 CB memory *
1.9 Voice Mail
1.9.1 Connect to Voice Mail
1.9.2 Voice Mail Number
1.0 Broadcast
*
2. Multimedia Messages
2.1 Inbox
2.2 Outbox
2.3 Shop MMS
2.4 Write New
2.5 Delete All
2.6 Setup
2.7 MMS Profile
3. Call Records
Using the Menus
67
3.1 Missed Calls
3.2 Incoming Calls
3.3 Outgoing Calls
3.4 Delete All
3.5 Call Time
3.5.1 Last Call Time
3.5.2 Total Outgoing
3.5.3 Total Incoming
3.5.4 Reset Timers
4. Camera
4.1 Take and Send
4.2 New Photo
4.3 My Photos
5. Sound Settings
5.1 Ring Tone
5.2 Ring Volume
5.3 Shop Ringtones
5.4 Alert Type
5.4.1 Light only
5.4.2 Melody
5.4.3 Vibration
5.4.4 Vibra+Melody
5.5 Keypad Tone
5.5.1 OFF
5.5.2 Cool
5.5.3 Piano
5.5.4 Tone
5.5.5 Beep
5.6 Message Tone
5.6.1 SMS Tone
5.6.2 SMS-CB Tone
5.7 Folder Tone
5.7.1 Off
5.7.2 Future
5.7.3 Crystal
Using the Menus
68
5.8 Power On/Off
5.8.1 Off
5.8.2 Classical
5.8.3 Cheerful
5.9 Extra Tones
5.9.1 Error Tone
5.9.2 Minute Minder
5.9.3 Connect Tone
6. Phone Settings
6.1 Infrared Activate
6.2 My Settings
6.2.1 Wallpaper
6.2.2 Menu Style
6.2.2.1 Film Style
6.2.2.2 Page Style
6.2.3 Shop Graphics
6.3 Greeting Message
6.4 Own Number
6.5 Language
6.5.1 English
6.5.2 Spanish
6.5.3 French
6.5.4 Automatic
6.6 Security
6.6.1 PIN Check
6.6.2 Change PIN
6.6.3 Phone Lock
6.6.4 Change Password
6.6.5 SIM Lock
*
6.6.6 FDN Mode
6.6.7 Change PIN2
6.7 Display Settings
6.7.1 Brightness
6.7.2 Back Light
6.7.3 Auto Light
*.
Shown only if supported by your SIM card.
Using the Menus
69
6.7.4 Service Light
6.7.5 Graphic Logo
6.8 Extra Settings
6.8.1 Auto Redial
6.8.2 Active Folder
6.8.3 Anykey Answer
6.9 Short Cut
6.9.1 Key Up
6.9.2 Key Right
6.9.3 Key Left
6.10 TTY Setting
6.10.1 Enable
6.10.2 Disable
6.11 Reset Settings
7. Organizer
7.1 Calendar
7.2 To Do List
7.3 Time & Date
7.3.1 Set Time
7.3.2 Set Date
7.3.3 World Time
7.3.4 Time Format
7.4 Alarm
7.4.1 Once Alarm
7.4.2 Daily Alarm
7.4.3 Morning Call
7.4.4 Remove Alarm
7.4.5 Autopower
7.5 Calculator
7.6 Currency Exchange
8. Network Services
8.1 Call Forwarding
8.1.1 Forward Always
8.1.2 Busy
8.1.3 No Reply
Using the Menus
70
8.1.4 Unreachable
8.1.5 Cancel All
8.2 Call Barring*
8.2.1 All Outgoing
8.2.2 International
8.2.3 International Except to Home
8.2.4 All Incoming
8.2.5 Incoming While Abroad
8.2.6 Cancel All
8.2.7 Change Barring Password
8.3 Call Waiting
8.4 Network Selection*
8.4.1 Automatic
8.4.2 Manual
8.5 Caller ID
8.5.1 Default
8.5.2 Hide Number
8.5.3 Send Number
8.6 Closed User Group*
8.6.1 Index List
8.6.2 Outside Access
8.6.3 Default Group
9. Funbox
9.1 Games
9.2 WAP Browser
9.2.1 Home
9.2.2 Favorites
9.2.3 http://
9.2.4 Settings
9.2.5 Clear Cache
9.2.6 Push Message
9.3 Downloads
9.3.1 Sounds
9.3.2 Pictures
Using the Menus
71
Using the Menus
72
Text Messages
The SMS (Short Message Service) function is a network
service and may not be supported by your network.
Messages can be sent by text, fax, Email and paging
messaging systems, provided that these services are
supported by your network. To send text messages by
phone, you must obtain the number of the SMS center
from your service provider.
When the message icon (
) appears, you have received
new text messages. If the message memory is full, an
error message is displayed and you cannot receive any
new messages. Use the Delete option in each message
box to delete obsolete ones.
Inbox
This message box is used to store the messages that you
have received.
When you enter this menu, the list of messages in the box
displays with the senders’ phone numbers or names, if
available in your Phonebook.
1. Select a message from the list and press the View soft
key to read the message contents.
2. To scroll through the contents, press the
3. To scroll to the previous or next messages, press the
or
key.
While reading a message, you can choose the following
options by pressing the Options soft key.
Text Messages
73
Delete: allows you to delete obsolete messages.
Send: allows you to resend the message.
Reply: (inbox only): allows you to reply to the sender by
sending a text message. You can also change the SMS
center number, if required.
Call Back: (inbox only): allows you to call the sender back.
Cut Address: allows you to extract a number from the
message text, so that you can call the number or save it in
the phonebook.
Move: allows you to move the message to the phone or SIM
memory.
Select Objects: allows you to save the objects, such as
sounds or images, from the message into your phone. You
can then use the objects when writing a message; for
details, see “Creating a Message using the Options” on
Outbox
This message box is used to store the messages that you
have already sent or will send.
When you enter this menu, the list of messages in the box
displays with the recipients phone numbers or names, if
available in your Phonebook.
1. Select a message from the list and press the View soft
key to read the message contents.
2. To scroll through the contents, press the
or
3. To scroll to the previous or next messages, press the
or
key.
Text Messages
74
While Reading a message, you can choose the following
options by pressing the Options soft key.
Delete: allows you to delete messages.
Send: allows you to resend the message.
Save Address: allows you to extract a number from the
message text, so that you can call the number or save it in
the phonebook.
Move: allows you to move the message to the phone or SIM
memory.
Select Objects: allows you to save the objects, such as
sounds or images, from the message into your phone. You
can then use the objects when writing a message.
Write New
In this menu, you can write and send a text message.
Note: You can enter up to 918 alphanumeric characters for your message. If
you add objects to the message, the number of characters you can enter will be
decreased.
Creating a Simple Text Message
1. Create your message as required.
2. When you have completed your message, press the
Options soft key. The following options are available.
● Send: allows you to send the message. The message
will be deleted after sending.
● Save and Send: allows you to save a copy of the
message into the specified memory and then send
Text Messages
75
the message to the destination. You can read the
message in your Outbox.
● Save: allows you to save the message into the
specified memory so that it can be sent later. You can
read the message in your Outbox.
● For information about the Text Formatting, Add
Objects, Add Templates, Add Phonebook, Add
3. Select Send or Save and Send, and press the Select
soft key.
If you want just to save the message, select Save. After
saving the message, the phone returns to the Messages
menu.
4. Select the memory where the message is saved and
press the OK soft key.
5. Enter a destination number and press the OK soft key.
The message is sent.
Creating a Message using the Options
1. Create your message.
2. Press the Options soft key.
3. Select one of the following options as required by using
the Up and Down keys and pressing the Select soft
key.
Text Formatting: allows you to format the style of the text.
For the Size attribute, the Normal, Large and Small sizes
Text Messages
76
are available. For the Underline and Strike through
attributes, select On or Off. The attributes can be
combined.
Add Objects: allows you to add the required sound,
melody picture or animation to the message. Select the
category of the object to be added: Sound, Melody,
Picture and Animation are available. In each category,
you can select the various factory-set items or choose an
item received from other sources, such as the Internet or
other phones.
Add Templates: allows you to apply one of the preset
message templates to the text. Select one of the nine
messages predefined via the Templates menu option
(Menu 1.4).
Add Phonebook: allows you to search through your
entries in your phonebook.
Add Bookmark: allows you to select from bookmarks
you’ve previously entered into your phone.
Language: allows you to change the language to be used
in the T9 input mode. Select the language to be used.
4. Complete the message, and send or save it by
following the procedure from Step 2 on page 75.
Templates
Using this menu, you can preset up to nine messages that
you use most frequently. Scroll through the template list
using the
and
keys. When the required
message template is highlighted, press the Select soft key.
Edit: allows you to write a new message or edit the
selected message.
Text Messages
77
Send Message: allows you to recall the selected message.
Once you have completed the message, you can send,
save and send, or simply save it. For details on how to
Delete: allows you to delete the selected message. You
are asked to confirm the deletion by pressing the Yes soft
key.
Settings
In this menu, you can set up default SMS information. A
setting group is a collection of settings required to send
messages. The number of setting groups available
depends on the capacity of your SIM card.
Setting x (where x is the setting group number): each
group has its own sub-menu.
SMS Center: allows you to store or change the number of
your SMS center required when sending messages. You
must obtain this number from your service provider.
Destination: allows you to store the default destination
number. The number will automatically display on the
Destination screen when you create a message.
Default Type: allows you to set the default message type
(Text, Fax, Email and Paging). The network can convert
the messages into the selected format.
Default Validity: allows you to set the length of time for
which your text messages will be stored at the message
center while attempts are made to deliver them.
Setting Name: allows you to give a name to the setting
group currently being defined.
Text Messages
78
Common Setting: four options are available.
Reply Path: allows the recipient of your SMS message to
send you a reply message via your message center, if the
service is provided by the network.
Delivery Reports: allows you to activate or deactivate the
report function. When this function is activated, the
network informs you whether your message has been
delivered or not.
Bearer Selection: allows you to choose between GSM and
GPRS.
My Objects
After saving any objects received from messages into your
phone memory, using the Select Objects option, you can
see the items in this menu.
Four categories of items are available:
● My EMS Melody
● My EMS Picture
● My EMS Animation
● Delete All
You can forward the items to other people by messages
and/or use them for your ring tone or background image.
You can delete all of the items using the Delete All option.
To...
Press the key
select a message
box to delete
Mark soft key
cancel the selection Unmark soft key.
Text Messages
79
To...
Press the key
delete the items in
the selected
Delete soft key.
message box
If you want to delete all of the media items, select All
Object.
Delete All
You can delete all of the messages in each message box
using the Delete all option.
To...
Press the key
select a message
box to delete
Mark soft key
cancel the selection Unmark soft key.
delete the items in
the selected
Delete soft key.
message box
If you want to delete all of the media items, select All
Messages.
Memory Status
This menu shows how many messages are currently
stored in the SIM, PHONE and CB memories.
Text Messages
80
Voice Mail
This menu provides you with a way of accessing your
voice mailbox (if provided by your network).
The following options are available.
Connect to Voice Mail: before using this feature, you must
enter the voice server number obtained from your service
provider (see menu option 1.9.1). You can then select this
option and simply press the OK soft key to listen to your
messages.
To quickly connect to the voice server, press and hold
down the
key in idle mode.
Voice Mail Number: allows you to change the voice mail
server number, if necessary.
To...
Then press the...
Enter the server
number
Corresponding numeric
keys.
Correct a digit
key.
Move the cursor to
the left/right
or key.
without clearing
the digit
Note: Voice Mail is a network feature. Please contact your service provider for
more information.
Broadcast
This network service allows you to receive text messages
on various topics, such as the weather or traffic.
Text Messages
81
Messages are displayed immediately they are received,
provided that:
● The phone is in idle mode
● The Receive option is set to Enable
● The message channel is currently active in the
channel list
The following options are available.
Read: lets you view the message. Volatile displays the
messages from the network, but loses its contents as
soon as the phone is switched off. Scroll through the
message by using the
and
keys. While reading
a message, press the Save soft key to store the message
in the Archive box for later retrieval.
Receive: allows you to enable or disable the reception of
broadcast messages.
Channel List: allows you to indicate the channels from
which you wish to receive broadcast messages. The
following options are available.
Select: used to enable or disable channels in the list by
marking or un-marking them respectively (a check mark is
displayed in front of each channel selected).
Add Channel: used to declare the ID and title for a new
channel.
Delete: used to remove a channel from the list.
Edit: used to change the ID and title of an existing channel.
Language: allows you to select your preferred language to
be used when displaying cell broadcast messages.
Please contact your service provider for more information.
Text Messages
82
Multimedia Messages
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service (SMS). It
provides automatic and immediate delivery of personal
multimedia messages from phone to phone or from phone
to e-mail. In addition to the familiar text content of text
messages, multimedia messages can contain images and
graphics. An MMS message is a multimedia presentation
in a single entry. It is not a text file with attachments. Using
the MMS feature, your phone can receive multimedia
messages. You can also send picture messages, which
are short messages that contain images, such as your
photos or graphics you downloaded from the Internet. This
function is available only if it is supported by your service
provider. Only phones that offer picture message features
can receive and display picture messages.
Inbox
Viewing a Message When You Receive it
When a new multimedia message comes in, the
display shows the text notification along with the
sender’s number.
1. Press the View soft key to view the message.
The display shows brief information about the message,
such as the sender’s number, the message size and the
subject. If you want to view the message later in the
Inbox, press the Exit soft key.
Multimedia Messages
83
2. To scroll through the message information, press the
or key.
While viewing the information, press the Options soft key
to use the following options:
If you are viewing a new message, the options are the
same as when you view a message as soon as you
receive it.
When you are reviewing message, the following options
are available:
Delete: deletes the message.
Reply: allows you to reply to the sender by sending a text
or picture message.
Call Back: all you to reply to the sender by sending a text
or picture message.
Cut Address: allows you to extract a number from the
message text, so that you can call the number or save it in
the Phonebook.
Forward: allows you to forward the message to another
person.
Save Picture: allows you to save an image from the
message into your phone. Photos are stored in the My
Photos folder and other images are in the Pictures folder
in the Downloads menu.
Save Sound: allows you to save a sound from the
message into the Sounds folder in the Downloads menu.
Viewing a Received Message in the Inbox
When you access the Inbox menu option, the list of
multimedia messages you received displays with the
Multimedia Messages
84
senders’ phone numbers, if they are available in your
Phonebook, or subjects.
1. Select a message and press the Select soft key to view
the message.
2. To scroll through the message, press the
key.
or
While viewing a message, you can choose the Message
options by pressing the Options soft key.
If you are viewing a new message, the options are the
same as when you view a message as soon as you
receive it. See the previous section.
When you are reviewing a message, the following options
are available:
Delete: deletes the message.
Reply: allows you to reply to the sender by sending a text
or picture message.
Callback: allows you to call the sender back.
Cut Address: allows you to extract the origination number
from the message, so that you can call the number or save
it in your Phonebook.
Forward: allows you to forward the message to another
person.
Save Picture: allows you to save an image from the
message into your phone. Images are stored in the
Pictures folder in the Fun Box menu option.
Save Sound: allows you to save a sound from the
message into the Sounds folder in the Fun Box
menu option.
Multimedia Messages
85
Outbox
When you access this menu option, the list of the picture
messages you sent or saved displays.
1. Select a message and press the Select soft key to view
the message contents.
2. To scroll through the message, press the
key.
or
While viewing a message, you can choose the following
options by pressing the Options soft key:
Delete: deletes the message.
Cut Address: allows you to extract the destination number
from the message, so that you can call the number save it
in your Phonebook.
Send: allows you to resend the message.
Edit Message: allows you to change the message
contents, sound, picture or text.
Shop MMS
This option allows you to access the Cingular website to
purchase additional multi-media messages (MMS).
Write New
This menu option allows you to create a new picture
message and then send it to multiple destinations.
Creating and Sending a Picture Message
1. Enter the subject of your message and press the OK
soft key.
Multimedia Messages
86
2. When Add Here highlights, press the Options soft key
and add the message contents using one of the
following options:
• Add Text: Enter the message text and press the OK soft
key.
• Add My Photo: allows you to add a photo you took using
the camera on your phone. Select a photo and press the
View soft key. Then, press the Select soft key to add. For
further details about using the camera, see “Camera” on
• Add Picture: allows you to add a picture stored in the
Pictures folder in the Downloads menu. Choose a picture
and press the Select soft key.
• Send: allows you to send the message. Use this option
when you finish creating the message. This option is
activated after you add a content to the message.
• Save: allows you to save the message in the Outbox so that
it can be sent later.
3. When the added content displays, press the
key
to highlight Add Here.
4. Repeat steps 2 and 3 until you finish creating your
message.
5. If you want to change the added items, press the Up or
Down key to highlight one and press the Options soft
key. The following options are available:
• Edit allows you to change text or replace the image with
another one.
• Delete: deletes the item from your message.
Multimedia Messages
87
• Send: allows you to send the message.
• Save: allows you to save the message in the Outbox so
that it can be sent later.
6. When you finish creating the message, select Send
from the options.
7. Choose one of the following options and press the
Select soft key:
• Phone Number: allows you to enter the phone number
you want.
• E-Mail: allows you to enter the e-mail address of the
recipient to send the message as an e-mail.
• Phone Book: allows you to recall a number from your
Phonebook.
8. Enter a number or an e-mail address, or select a
number in Phonebook. When the correct number or
address is displayed, press the OK soft key.
9. If you want to send the message to multiple
destinations, select Add Destination and press the
Select soft key.
10. Repeat steps 7 to 10. You can enter up to 11
destinations.
11.After entering the destinations, press the Select soft
key when Send Message highlights.
12.If you want to edit the destinations, select one and
press the Select soft key. You can change or delete it.
Multimedia Messages
88
13.When you are finished entering the destinations, select
Send Message and press the Select soft key. Your
phone sends the message.
Delete All
This menu option allows you to delete all of the picture
messages in each message box, Inbox, and Outbox.
When a confirming message displays, press the Yes soft
key to confirm.
Setup
You can change the default message settings.
Turn a give option on or off, press the Select soft key to
place or remove a check mark on each option
The following options are available:
Hide ID: When this option is checked, your phone number
is not displayed on the recipient’s phone.
Delivery Report: When this option is checked, the
network informs you whether or not your message has
been delivered.
Read Reply: When this option is checked, your pone
sends a request for a reply along with your message to the
recipient.
Auto Download: When this option is checked, your phone
automatically downloads the received pictures or sounds.
MMS Profile
In this menu, you can configure various settings that are
required when you send or receive multimedia messages.
The following options are available:
Multimedia Messages
89
Profile Name: Name that you wish to assign to the MMS
server.
Connection URL: Address of your MMS server.
Security: Data transmission mode. Choose Secure to
protect your data against unauthorized access; otherwise,
choose Non-Secure.
IP address: Gateway address required to connect to the
MMS server.
User name: User ID required to connect to the MMS
server.
Password: Password required to connect to the MMS
server.
APN: Access point name used for the address of the MMS
server.
For further details, contact your service provider.
Multimedia Messages
90
Call Records
In this menu, you can view the:
● Missed, incoming or outgoing calls
● length of the call you made or received
● cost of your calls
Note: You can access all numbers in the three types of call records by pressing
the
key in idle mode.
Missed Calls
This option lets you view the last 20 unanswered calls.
The number and name, if available, are displayed,
together with the date and time at which the call was
received. By pressing the Options soft key, you can:
● delete the call from the list
● edit the number, if available, and save it in the
Phonebook
● make a call to the number
Incoming Calls
This option lets you view the last 20 phone calls answered.
The number and name, if available, are displayed,
together with the date and time at which the call was
received. By pressing the Options soft key, you can:
● Edit the number if available and dial it or save it in the
phonebook
● Delete the call from the list
● Make a call to the number.
Call Records
91
Outgoing Calls
This option lets you view the last 20 numbers dialed.
The number and name, if available, are displayed,
together with the date and time at which the call was
made. By pressing the Options soft key, you can:
● Delete the number
● Edit the number and save it in the phonebook
● make a call to the number
Delete All
You can delete all of the numbers stored in each call
record.
When a confirming message appears, press the Yes soft
key to confirm.
Call Time
This option lets you view the timers for calls made and
received.
The following timers are available.
Last Call Time: length of the last call.
Total Outgoing: total length of all calls made since the
timer was last reset.
Total Incoming: total length of all calls received since the
timer was last reset.
Reset Timers: option used to reset the call timers; you
must first enter the phone password (see “Phone
Call Records
92
Camera
Using the camera module built in your phone, you can take
pictures of people or events while on the move.
Additionally, you can send photos to other people in a
picture message or as an e-mail attachment. The camera
produces JPEG pictures.
Take and Send
This menu allows you to take a picture to send the photo
as a picture message to other destinations.
Note: When you take a picture in direct sunlight or under too bright illumination,
shading may occur on the picture.
Taking a Picture to Send a Message
1. Accessing this menu turns on the camera at the top
center of the phone. You can see the picture to be
captured on the display.
2. Adjust the picture by rotating the camera module.
Use the
and
keys to adjust the brightness of
the picture.
Use the and
The and
keys to adjust the size of the picture.
keys on the left side of the phone allow you
to flip the picture up and down.
3. Press the Take soft key to take a picture.
If you want to have the delay time of 10 seconds, press the
After 10s soft key.
Camera
93
4. Press the Save soft key to save the photo.
5. Enter a name for your photo and press the OK soft key.
Picture Message” on page 86 to send the photo as a
picture message.
New Photo
In this menu, you can take a picture and save it.
Accessing this menu turns on the camera at the top center
of the phone.
My Photos
This menu allows you to review your photos.
When you access this menu, the latest photo is displayed.
Press the
or
key to scroll through the photos.
Pressing the Multi soft key shows the photos as thumbnail
images on one screen. In thumbnail view mode, yes the
navigation keys to scroll through the photos. To go back to
normal view mode, press the View soft key.
Press the Options soft key to use the following options:
Send: allows you to send the photo as a picture message.
Wallpaper: allows you to set the photo to be displayed on
the idle screen as a background image.
Delete: deletes the photo.
Deletes All: deletes all of the photos saved in your phone.
Rename: allows you to change the name of the photo.
Camera
94
Sound Settings
You can use the Sound Settings feature to customize
various settings, such as the:
● Ring melody, volume and type
● Sounds made when you press a key, make an error or
receive a message
Ring Tone
This option allows you to select the required ring melody.
You can choose between many different melodies. Each
time you select a melody, it is played for a few seconds. If
you have downloaded any sounds from the Internet or
Escapers program or received any ring tone messages,
you can view the list in this menu.
Ring Volume
This option allows you to adjust the ring volume to one of
five levels.
Use the
and
keys or the
and
keys on
the left side of the phone.
Shop Ringtones
This option allows you to access the Cingular website to
purchase additional ringtones.
Alert Type
This option allows you to specify how you are to be
informed of any incoming calls.
The following options are available.
Light only: only the backlight is switched on; the phone
neither rings nor vibrates.
Sound Settings
95
Melody: the phone rings using the ring melody selected
via the
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three times and
then starts ringing.
Keypad Tone
This option allows you to select the tone that the keypad
generates when you press a key.
The following options are available.
Off: the keys do not make any sound.
Cool: each key, when pressed, makes the same sound
but is a different tone from the Beep option.
Piano: each key, when pressed, plays the piano melody.
Tone: each key, when pressed, makes a different sound.
Beep: each key, when pressed, makes the same sound.
Message Tone
This option allows you to select how the phone informs
you that a new message has been received.
SMS Tone
This option allows you to select how the phone informs
you that a new SMS message has been received.
The following options are available.
SMS Tone1~10: the phone uses an SMS tone. You are
provided with ten SMS tones.
OFF: the phone does not use the SMS tone.
Light Only: the service light at the top of the phone
flashes.
Vibration: the phone vibrates.
Sound Settings
96
Single Beep: the phone beeps once.
SMS CB Tone
This option allows you to select how the phone informs
you that a new cell broadcast (CB) message has been
received.
The following options are available.
OFF: the phone does not use the CB tone.
Light Only: the service light at the top of the phone
flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS-CB Tone1~10: the phone uses a CB tone. You are
provided with ten CB tones.
Folder Tone
This option allows you to chose the sound when opening
and closing the folder.
Three options are Off, Future, and Crystal. To turn the
sound off, select Off.
Power On/Off
Use this option to chose the sound you prefer when
turning your phone on or off. Three options are Off,
Classical, and Cheerful.
Sound Settings
97
Extra Tones
You can customize various other tones used by the phone.
To turn a given tone...
Then press the...
On
On soft key.
A check mark is displayed
in front of the option.
Off
Off soft key again.
The check mark is no
longer displayed.
The following options are available.
Error Tone: sets whether the phone informs you that you
have made a mistake or not.
Minute Minder: sets whether the phone must beep every
minute during an outgoing call to keep you informed of the
length of your call.
Connect Tone: sets your phone to beep when the person
you are calling answers the phone.
Sound Settings
98
Phone Settings
Many different features of your phone can be customized
to suit your preferences. All of these features are
accessed via the Phone Settings menu.
Infrared Activate
Infrared Activate provides use of your phone as a modem
or to synchronize to the EasyGPRS application. This
feature allows you to send or receive data through the
infrared port. To use an infrared connection, you must:
● configure and activate an IrDA-compliant infrared port
on your PC.
● activate the infrared feature on the phone; the IrDA
icon appears on the top line of the display.
● align the IrDA port on the phone with the IrDA port on
your computer.
Phone Settings
99
The connection is ready for data transmission.
If there is not communication between your phone and the
IrDA-compliant device within 30 seconds of activating the
feature, it is automatically deactivated.
Note: For the best performance, use the optional data link cable. You can buy
one from your local Samsung dealer.
My Settings
You can change the background image and the color of
the components in the display according to your
preference.
Wallpaper
This option allows you to change the background image
(wallpaper) to be displayed in idle mode.
To change the background image, proceed as follows.
Phone Settings
100
1. Scroll through the list by pressing the
key.
or
You have various preset images available. You can also
select the blank background and any images downloaded
from the Internet or the EasyGPRS program.
2. Press the Select soft key when the required image is
highlighted.
The selected image is displayed.
3. After viewing the image, press the Select soft key to
display it on the idle screen. The display asks you if you
want to display text on the screen.
Menu Style
This option allows you to select the menu display style.
You can choose between Film Style and Page Style.
Shop Graphics
This option allows you to access the Cingular website to
purchase additional graphics.
Phone Settings
101
Greeting Message
This option allows you to set a greeting message to be
displayed briefly when the phone is switched on. The
current message is displayed.
To...
Then press the...
Clear the existing
message
key and hold it
down until the message is
cleared.
Enter a new
message
Appropriate alphanumeric
keys.
Change the text
input mode
soft key.
For further details on how to enter characters, refer to
Own Number
This feature allows you to:
● Assign a name to each of your own phone numbers
registered on your SIM card
This function is a memory aid, which you can use to check
your own phone numbers if you need to do so.
Any changes made here do not in any way affect the
actual subscriber numbers on your SIM card.
Language
You can select a display language. When the language
option is set to Automatic, the language is automatically
selected according to the language of the SIM card used.
Phone Settings
102
Security
The Security feature enables you to restrict the use of your
phone to:
● The people of your choice
● The types of calls of your choice
Various codes and passwords are used to protect the
features of your phone.
PIN Check
When the PIN Check feature is enabled, you must enter
your PIN each time you switch the phone on.
Consequently, any person who does not have your PIN
cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
To change your PIN, refer to the Change PIN menu option.
The following options are available.
Disable: the phone connects directly to the network when
you switch it on.
Enable: you must enter the PIN each time the phone is
switched on.
Change PIN
This feature allows you to change your current PIN to a
new one, provided that the PIN Check feature is enabled.
You must enter the current PIN before you can specify a
new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Settings
103
Phone Lock
When the Phone Lock feature is enabled, the phone is
locked and you must enter the 8-digit phone password
each time the phone is switched on.
The password is factory set to “00000000”. To change the
phone password, refer to the Change Password menu
option.
Once the correct password has been entered, you can use
the phone until you switch it off.
The following options are available.
Disable: you are not asked to enter the phone password
when you switch the phone on.
Enable: you are required to enter the phone password
when you switch the phone on.
Change Password
The Change Password feature allows you to change your
current phone password to a new one. You must enter the
current password before you can specify a new one.
The password is factory set to “00000000”. Once you have
entered a new password, you are asked to confirm it by
entering it again.
SIM Lock
The SIM Lock feature allows you to lock your phone so
that others are unable to use it. When the SIM Lock
feature is enabled you must enter the password that you
assigned to use your phone. Options available are:
Disable: you are not asked to enter the SIM Lock
password when you switch the phone on.
Phone Settings
104
Enable: you are required to enter the SIM Lock password
when you switch the phone on.
FDN Mode
The FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The following options are available.
Disable: you can phone any number.
Enable: you can only call phone numbers stored in the
phonebook. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
option is not displayed.
To change your PIN2, refer to the Change PIN2 menu
option.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
option is not displayed.
Phone Settings
105
Display Settings
Brightness
This option allows you to adjust the contrast of the display
and make it lighter or darker.
To adjust the display contrast:
1. Select the required display, Main LCD or Front LCD,
and press the Select soft key.
2. Adjust the contrast using the
and
keys,
and press the Select soft key.
3. When you have made your choice, press the OK soft
key to save the selection.
Back Light
You may choose whether or not the phone uses the
backlight. marginal increase in standby/talk time can be
achieved by turning the backlight off.
Select the length of time the backlight is on. Available
settings are OFF, 15 or 30 seconds, 1, 3, or 10 minutes.
The backlight comes on when you press a key or receive a
call or message and remains illuminated for the specified
length of time.
Auto Light
Using this feature, you can specify the time for which the
backlight is to be used. This feature helps conserve your
battery power.
The following options are available:
Phone Settings
106
Disable: the backlight is used according to the setting in
the Back Light menu option.
Enable: the backlight is used only during the specified
period of time. Set the time when the phone will turn on
the light and turn it off, using the appropriate number keys.
Service Light
This option allows you to select whether or not the service
light on the folder is used or which color is flashes.
Select one from the seven settings available. When the
phone is ready for use, the service light flashes in the
appropriate color.
Graphic Logo
This option allows yoU to display youR operator’s logo
instead of its name.
On: the operator logo stored in your phone is displayed in
idle mode; if no logo has been stored, the operator name
is displayed.
Off: the operator name is displayed in the idle mode.
Extra Settings
You can turn the automatic redialing or answering features
on or off.
To turn a feature...
Then press the...
On
ON soft key.
A check mark is displayed
in front of the option.
Phone Settings
107
To turn a feature...
Then press the...
Off
OFF soft key.
The check mark is no
longer displayed.
The following options are available.
Auto Redial: when this option is checked, the phone
makes up to ten attempts to redial a phone number after
an unsuccessful call.
Note: The interval between two call attempts varies.
Active Folder: when this option is checked, you can simply
press any key to answer the incoming call.
Anykey Answer: when this option is checked, you can
answer an incoming call by pressing any key, except the
Reject soft key. To reject the call, press the
key or
the Reject soft key.
When this option is unchecked, you can only press the
key or Accept soft key.
ShortCut
The navigation keys can be used as shortcut keys. When
held down in idle mode, they allow you to access specific
menu options directly.
To assign a shortcut to a key, proceed as follows.
1. Select the key to be used as a shortcut key by pressing
the
or
key, followed by the Select soft key.
Key up
(
)
)
Key right
(
Phone Settings
108
Key left
(
)
2. Select the menu option to be assigned to the key by
pressing the or key.
Note: To deactivate a shortcut key, select the None option.
3. Press the Select soft key to save the selection.
TTY Setting
TTY (also known as a TDD or Text Telephone) is a
telecommunications device that allows people who are
deaf or hard of hearing, or who have speech or language
disabilities, to communicate via a telephone.
Your phone is compatible with select TTY devices which
have an internal CTM. Please check with the manufacturer
of your TTY device for connectivity information and to
ensure that the TTY device supports digital wireless
transmission.
The following options are available:
Enable: CTM is active and TTY is available for use.
Disable: TTY is not available for use.
Note: For additional technical support you may access the following website or
call 1-888-987-4357.
http://www.samsungtelecom.com/contact_us/
accessibility.asp
Phone Settings
109
Reset Settings
You can easily reset your phone to its default
configuration. To do so, proceed as follows.
1. Select the Reset Settings menu option.
2. Enter the 8-digit phone password and press the OK
soft key.
Note: The password is preset to “00000000”. To change this password, refer
Phone Settings
110
Organizer
The Organizer feature enables you to:
● View the calendar and organize your schedule
● Define a list of things to do
● Set the current date and time
● Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for example)
● Use the phone as a calculator for basic mathematical
equations or currency exchange operations
Calendar
With the Calendar feature, you can:
● Consult the calendar
● Write memos to keep track of your schedule and
trigger an alarm if necessary
Consulting the Calendar
When you select the Calendar menu option, the calendar
is displayed. The following options are available when you
press the Options soft key.
Search all: displays all memos set, regardless of the day
and starting with the oldest. To scroll through the memos,
press the
or
key.
Delete all: allows you to delete all memos. You are asked
to confirm your action.
Go to date: allows you to jump to a specific date.
Exit: exits the Calendar feature and returns to the idle
mode.
Organizer
111
Writing a Memo
To write or edit a memo on a specific date, proceed as
follows.
1. Select the required date in the calendar, using the
navigation keys.
Note: To skip to the previous or next month, press the
and
keys on
the left side of the phone.
2. Press the Select soft key.
An empty memo screen is displayed to allow you to enter
your memo.
3. Enter your memo and then press the OK soft key.
You are asked if you wish to set the alarm.
4. If you want the alarm to ring on the chosen day, press
the Yes soft key. Otherwise, press the No soft key.
5. If you pressed the Yes soft key, set the time for the
alarm and press the OK soft key.
The color of the date is changed to green to indicate
that a memo exists.
Editing a Memo
If you select a day for which a memo already exists, you
an press the Edit soft key to edit the memo displayed.
Organizer
112
Once you have finished editing the memo, press the OK
soft key. The following options are then available when you
press the Options soft key.
Alarm: allows you to set the alarm to ring on the chosen
day.
Erase: allows you to delete the memo.
Copy to: allows you to copy the memo to another date
and/or time.
Move to: allows you to change the date and/or time of the
memo.
1. To edit a memo, select the Calendar menu option.
2. Select the date your memo is set to occur by using the
right and left arrow keys. Press the Select soft key.
3. Press the Options soft key.
4. Select the Edit menu option and edit the memo
appropriately.
To Do List
This feature allows you to:
● Draw up a list of tasks to be done
● Assign a priority and deadline to each task
● Sort the tasks by priority and status mark
Creating the To Do List
1. Press the New soft key.
2. Enter the first task.
Organizer
113
Note: You can enter up to 40 characters. For further details on how to enter
3. Press the OK soft key.
4. Select high, normal or low priority using the
or
key and press the Select soft key.
5. Enter your deadline.
If you do not want to set a deadline, press the Skip soft
key.
6. Press the OK soft key.
Editing the To Do List
If tasks are already defined in the To Do List when you
select the To Do List menu option, the current contents
are displayed with the status mark and priority.
The following options are available.
To...
Then...
View the details Highlight the task.
for a specific
task
Press the View soft key.
Organizer
114
To...
Then...
Change the
status of a
specific task
Highlight the task.
Press the
key to mark
the task as completed as of
the current date and time.
or
Highlight the task.
Press the Options soft key.
Select the Mark option.
Select the appropriate status
(Done or Undo).
Create a new
task
Press the Options soft key.
Select the New option.
Enter the text, priority and
deadline for the task.
Edit an existing Highlight the task.
task Press the Options soft key.
Select the Edit option.
Change the text, priority and
deadline for the task.
Sort the existing Press the Options soft key.
tasks by priority Select the Sort option.
or status
Select the sort criterion (High,
Low, Done or Undo).
Organizer
115
To...
Then...
Copy a task
Highlight the task.
Press the Options soft key.
Select the Copy option.
Change the text, priority and
deadline for the task as
required.
Copy a task to
the calendar
Highlight the task.
Press the Options soft key.
Select the Copy to calendar
option.
Change the text and deadline
for the task and set the alarm
as required.
Delete a task
Highlight the task.
Press the Options soft key.
Select the Delete option.
Delete all tasks Press the Options soft key.
Select the Delete all option.
Confirm the deletion by
pressing OK.
Exit the To Do
list
Press the Options soft key.
Select the Exit option.
Organizer
116
Time & Date
This option allows you to change the current time and date
displayed. You can also check the current time for
Greenwich Mean Time (GMT) and 21 major cities around
the world.
The following options are available.
Set Time: allows you to enter the current time. You can
choose the time format via the Time Format menu option.
Note: Before setting the time, you must specify your time zone, via the World
Time menu option (Menu 7.3.3).
Set Date: allows you to enter the day, month and year.
World Time: allows you to check the current time for
Greenwich Mean Time (GMT) and 21 major cities around
the world, using the
The screen shows the:
● City name
and
keys.
● Current date and time
● Time difference between the selected city and your
city if you have set the local time (see below for further
details) or GMT (by default)
To select the time zone in which you are located, proceed
as follows.
1. Select the city corresponding to your time zone by
pressing the
or
key one or more times.
The local date and time are displayed.
2. Press the Set soft key.
Time Format: allows you to change the time format to 24
Hours or 12 Hours.
Organizer
117
Alarm
This feature allows you to:
● Set the alarm to ring at a specific time
● Set the phone to switch on automatically and ring the
alarm even if the phone is switched off (Auto power
menu option set to Enable)
The following options are available.
Once Alarm: the alarm rings only once and is then
deactivated.
Daily Alarm: the alarm rings every day at the same time.
Morning Call: the alarm rings to wake you up in the
morning.
To set the alarm, proceed as follows.
1. Choose the type of alarm to be set.
2. Enter the required time and day of the week, if
applicable.
3. Press the OK soft key.
4. If you select Morning Call in Step 1, select the repeat
option: Monday to Friday or Monday to Saturday.
Remove Alarm: deactivates all alarm settings.
Auto power: if this option is set to Enable, the alarm will
ring at the specified time, even when the phone is
switched off.
If the menu option is set to Disable and the phone is
switched off at the specified time, the alarm will not ring.
To stop the alarm when it rings, press the Exit soft key.
When setting or viewing an alarm, the following options
are available when you press the Options soft key.
Organizer
118
Remove Alarm: deactivates the current alarm.
Alarm Sound Set: allows you to select the alarm melody this
option can be found in each of the Alarm options.
Calculator
With this feature, you can use the phone as a calculator.
The calculator provides the basic arithmetic functions:
addition, subtraction, multiplication and division.
Using the Calculator
1. Enter the first number using the numeric keys.
2. Press the right soft key until the required arithmetic
symbol appears: + (add), - (subtract), * (multiply), /
(divide).
3. Enter the second number.
Repeat Steps 1 to 3 as many times as required.
Notes:
• To erase any mistakes and clear the display, press the
key.
• To include a decimal point or a bracket, press the left soft key
until the required symbol is displayed.
4. To calculate the result, press the
key.
Currency Exchange
Using this menu option, you can make currency
conversions.
1. Enter the current exchange rate of your source
currency and press the OK soft key.
Organizer
119
You can insert a decimal point by pressing the
key.
2. Enter the amount for which you wish to conduct the
currency conversion and press the OK soft key.
The exchange rate amount you entered and equivalent
value are displayed.
3. Press the Exit soft key to exit the currency convertor.
Organizer
120
Network Services
These menu functions are network services. Please
contact your service provider to check their availability and
subscribe to them, if you wish.
Call Forwarding
This network service enables incoming calls to be
rerouted to the number that you specify.
Example:You may wish to forward your business calls to a
colleague while you are on holiday.
Call forwarding can be set up in the following ways:
Forward Always: all calls are forwarded.
Busy: calls are forwarded when you are already on
another call.
No Reply: calls are forwarded when you do not answer the
phone.
Unreachable: calls are forwarded when you are not in an
area covered by your service provider.
Cancel All: all call forwarding options are canceled.
You can specify individual forwarding options for each of
the following call types:
● Voice calls only
● Data calls only
To set your call forwarding options:
1. Select the type of call forwarding by pressing the Up or
Down key, and then press the Select soft key.
2. Select the type of calls to be forwarded by pressing the
Up or Down key, and then press the Select soft key.
Network Services
121
The current status displays. If the option has already been
set, the number to which the calls are forwarded displays.
To
Press the
activate call
forwarding
Activate soft key.
Go to Step 4.
change the
call number
Change soft key.
Go to Step 4.
deactivate call
forwarding
Remove soft key.
3. Enter the number to which the calls are to be forwarded
and press the OK soft key.
To enter an international code, press the 0 key until the
+ sign displays.
The phone sends your settings to the network and the
network’s acknowledgement displays.
You can deactivate all call forwarding settings by selecting
the Cancel All option.
Call Barring
The call barring network service allows you to restrict your
calls.
Call barring can be setup in the following ways:
All Outgoing: calls cannot be made.
International: International calls cannot be made.
International Except to Home: when abroad, calls can
be made on to numbers within the current country and to
Network Services
122
your home country, which is the country where your home
network provider is located.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be received when
you are using your phone outside of your home service
area.
Cancel All: all call barring setting are deactivated; calls
can be made and received normally.
You can specify individual barring options for each of the
following call types:
● Voice calls only
● Data calls only
To set your call barring options:
1. Select the type of call barring required by pressing the
or
key until the appropriate option highlights
and then press the Select soft key.
2. Select the type of calls to be barred by pressing the
or
key until the appropriate option highlights
and then press the Select soft key.
3. Press Activate soft key to confirm your settings.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and the
network’s acknowledgment displays.
To deactivate specific call barring settings:
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option applies.
Network Services
123
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and the
network’s acknowledgement displays.
You can also deactivate all call barring settings by
selecting the Cancel All option.
Change Barring Password: you can set and change the
call barring password obtained from your service provider
using this option. You must enter the current password
before you can specify a new one.
Once you have entered a new password, you are asked to
confirm it by entering it again.
Call Waiting
This network service informs you when someone is trying
to reach you during another call.
You can specify individual call waiting options for each of
the following call types:
● Voice calls only
● Data calls only
To set your call waiting options:
1. Select the type of calls to which the call waiting option
is to be applied by pressing the
or
key, and
then press the Select soft key.
The screen informs you whether call waiting is activated or
deactivated.
Network Services
124
2. You can activate or deactivate the call waiting feature
as necessary by using the Activate or Deactivate soft
key respectively.
To return to the previous screen, press the Exit soft key.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
Network Selection
The Network Selection feature enables you to
automatically or manually select the network used when
roaming outside of your home area.
Note: You can select a network other than your home network only if there is a
valid roaming agreement between them.
To indicate to automatically or manually select the network
when roaming:
1. When Network Selection displays, press the Select
soft key.
2. Press the
or
key until the appropriate option
highlights and then press the OK soft key.
If you select Automatic, you are connected to the first
available network when roaming.
If you select Manual, the phone scans for the available
networks. Go to Step 3.
3. Press the
or
key until the preferred network
highlights and then press the OK soft key.
You are connected to that network.
Network Services
125
Caller ID
You can prevent your phone number from being displayed
on the phone of the person being called.
Note: Some networks do not allow the user to change this setting.
The following options are available:
Default: the default setting provided by the network is
used.
Hide Number: your number does not display on the other
person’s phone.
Send Number: your number is sent each time you make a
call.
Closed User Group (CUG)
This network service allows incoming and outgoing calls
to be restricted to a selected user group. You may be a
member of up to ten user groups. For details on how to
create, activate and use a closed user group, contact our
service provider.
Example: A company lends SIM Cards to its employees
and wants to restrict outgoing calls to members of the
same team.
Activating a Closed User Group
If you select the Closed User Group menu, you can enter
the CUG function. You can now access the following
options after pressing the Select soft key.
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index as advised by your service provider
or delete the selected group.
Network Services
126
To
Press the
scroll through the
existing CUG
index
or
key.
Options soft key, select
the Add option and enter
the index.
add a new CUG
index
Options soft key and
select the Delete option.
delete a CUG
activate a CUG
index
Options soft key and
select the Activate
option.
Outside Access: lets you enable or disable calls to
numbers other than those nominated for the Closed User
Group. This feature depends on the nature of your CUG
subscription. Please check with your service provider.
Default Group: you may set a default CUG with your
service provider. If you have done so, you can enable the
Default Group option on your phone. When making a call,
you are given the option of using your default CUG,
instead of selecting one from the list.
Deactivate: deactivates the CUG function. This menu
appears only when the default group is enabled or a CUG
index is selected.
Network Services
127
Network Services
128
Funbox
The Funbox menu contains several fun options.
Games
You can enjoy three games with your phone.
Scroll to the required game, using the
and
keys and press the Select soft key. For further details n
the game, refer to the on-screen help.
WAP Browser
Your phone is equipped with a WAP (Wireless Application
Protocol) browser to allow you to access and navigate the
Wireless Web via your phone.
Home
Selecting this option connects the phone to the network
and loads the homepage of the Wireless Web service
provider.
The content of the WAP Browser startup homepage
depends on your Wireless Web service provider. To scroll
through the screen, use the
and
keys.
Note: To access the startup homepage from any other screen in the WAP
Browser, use the Home option. For more information on the WAP Browser
menus, see page 131.
Exiting the WAP Browser
To exit the browser at any time, simply press the
or press and hold the key.
key
Funbox
129
Navigating the WAP Browser
To
Press the
scroll through and
select browser
items
or
key until the
symbol points to the
required item, and then
press the OK soft key to
confirm the selection.
select a numbered corresponding numeric key.
item
return to the
previous page
Back soft key or the
key.
return to the startup
homepage
key and select the Home
menu option. For further
details about this option, see
Entering Text in the WAP Browser
When you are prompted to enter text, the current text entry
mode is indicated on the screen. The following modes are
available:
Mode
Description
Allows you to enter letters in the
alphabet. Press the corresponding
key until the letter you want displays.
/
Allows you to enter numbers.
Funbox
130
Note: To enter a symbol, press the
key until it displays.
To change
modes
press the
times.
key one or more
key.
To enter a
space
press the
To edit text
set the cursor to the right of the
character(s) to be corrected.
press the
key as
required.
enter the correct character(s).
Using and Selecting Menu Options
Various menu options are available when you are using
the WAP Browser to navigate the Wireless Web.
To access a menu option:
1. Press and hold the
A menu displays.
key.
2. Highlight a menu option by pressing the
keys.
and
3. Select the option by pressing the Select soft key.
4. If necessary, select the secondary option using the
and
confirm.
keys, and press the Select soft key to
Note: The menus may vary, depending on your version of the WAP Browser.
Funbox
131
The following options are available:
Reload: reloads the current page.
Home: takes you back at any time to the homepage of the
Wireless Web service provider.
Go to URL: allows you to manually enter the URL address
of the required Web page. After entering an address,
press the OK soft key to go there directly.
Show URL: displays the URL address of the site to which
you are currently connected. It also enables you to declare
the current site as the startup homepage.
To
Press the
declare the current Option soft key, select the
page as your Save to Home option and
startup homepage press Select.
set a bookmark for Option soft key, select the
the current page
Save to Bookmark option
and press Select.
cancel your setting Back soft key.
Edit Home: allows you to change the startup homepage
manually. Enter the required URL and press the OK soft
key. For more information about entering text, numbers or
Inbox: allows you to read the messages received from the
web server.
Favorites
This menu option allows you to store the URL addresses
of your favorite web sites. You can access this menu
Funbox
132
directly by pressing and holding down the
using the WAP Browser.
key while
To store a URL address:
1. Select an empty location and press the Options soft
key.
2. Enter the address and press the Enter soft key.
3. Enter a name for the favorite item and press the Enter
soft key.
After saving favorite items, you can use the following
options by pressing the Options soft key:
Goto URL: quickly accesses you to the site.
Edit: allows you to edit the address.
Erase: deletes the address.
http://
This menu option allows you to manually enter the URL
address of the web site that you wish to access.
Settings
This option allows you to set up five proxy servers for the
WAP browser. Contact your service provider for details
about setting options.
For each server, the following options are available:
Profile Name: enter a name that you wish to assign to the
HTTP proxy server.
Funbox
133
Homepage URL: set the address of your startup
homepage. When the default homepage displays, you can
delete it using the
key and enter your own choice.
Security: set the data transmission mode. Choose
Secure to protect your data against unauthorized access;
otherwise, choose Non-Secure.
IP Address: enter the WAP gateway address required to
connect to the Internet.
Bearer: select the bearer to be used for each type of
network address accessed: GPRS or Data. The remaining
options depend on the Bearer setting.
When the bearer is set to Data
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server phone number.
Data Call Type: select a data call type from Analogue or
ISDN.
When the bearer is set to GPRS
User Name: enter the User ID required to connect to the
GPRS network.
Password: enter the password required to connect to the
GPRS network.
APN: enter the access point name used for the address of
the GPRS network gateway.
Note: The WAP Browser settings may vary, depending on the service provider.
Contact your service provider for further information.
Funbox
134
Clear Cache
You can clear the information stored in the cache, which is
the phone’s temporary memory which stores the most
recently accessed Web pages.
Press the Yes soft key to confirm the deletion. Otherwise,
press the No soft key.
Push Message
This menu option allows you to receive and access web
messages from the server.
The following options are available:
Inbox: allows you to read the messages received from the
web server.
Receive: allows you to set whether or not your phone
receives web messages.
Delete All: allows you to delete all of the web messages.
Downloads
Sounds
In this menu, you can view the list of sounds downloaded
from the server. You can set the downloaded sounds as
the current ring tone, but you cannot send the sounds to
other phones.
When the memory is full, a warning message displays and
the phone rejects additional sounds until you erase the
obsolete ones.
Funbox
135
Pictures
In this menu, you can view the list of pictures downloaded
from the server. You can set the downloaded pictures as
the current background image, but cannot send them to
other phones.
When the memory is full, a warning message displays and
the phone rejects additional pictures until you delete the
obsolete ones.
Funbox
136
Solving Problems
Before contacting the after-sales service, perform the
following simple checks. They may save you the time and
expense of an unnecessary service call.
When you switch your phone on, the following messages may
appear:
Insert SIM Card
● Check that the SIM card is correctly installed.
Phone Locked Enter Password
● The automatic locking function has been enabled. You
must enter the phone’s password before you can use
the phone.
Enter PIN
● You are using your phone for the first time. You must
enter the Personal Identification Number (PIN)
supplied with the SIM card.
● The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered. To
disable this feature, use the PIN Check menu option
(Menu 6.6.1).
Enter PUK
● The PIN code was entered incorrectly three times in
succession and the phone is now blocked. Enter the
PUK supplied by your network operator.
Solving Problems
137
“No service,” “Network failure” or “Not done” displays.
● The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
● You are trying to access an option for which you have
not taken out a subscription with your service
provider. Contact the service provider for further
details.
You have entered a number but it was not dialed
● Have you pressed the
key?
● Are you accessing the right cellular network?
Your correspondent cannot reach you
● Is your phone switched on (the
key pressed for
more than one second)?
● Are you accessing the right cellular network?
Your correspondent cannot hear you speaking
• Have you switched off the microphone?
• Are you holding the phone close enough to your mouth?
The microphone is located at the bottom of the phone.
The phone starts beeping and “**Warning** Low Battery”
flashes on the display
● The battery is insufficiently charged. Replace the
battery and recharge it.
Solving Problems
138
The audio quality of the call is poor
● Check the signal strength indicator on the display
(
); the number of bars indicates the signal strength
from strong ( ) to weak ( ).
● Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialed when you recall a Phonebook entry
● Check that the number has been stored correctly, by
using the Phonebook Search feature.
● Re-store the number, if necessary.
If the above guidelines do not help you to
solve the problem, take a note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
Solving Problems
139
Solving Problems
140
Access Codes
There are several access codes that are used by your
phone and its SIM card. These codes help you protect the
phone against unauthorized use.
When requested for any of the codes explained below,
enter the appropriate code (displayed as asterisks) and
press the OK soft key. If you make a mistake, press the C
key one or more times until the incorrect digit is cleared
and then continue entering the correct code.
The access codes, except for the PUK and PUK2 codes
can be changed using the Security menu option (Menu 6.6).
Important! Avoid using access codes resembling
emergency numbers, such as 911, so that you do not dial
an emergency number accidentally.
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorized use. The phone
password is supplied with the phone and is preset to
“00000000” at the factory.
To
See
activate/deactivate the
Phone Lock feature
change the phone
password
Access Codes
141
PIN
The Personal Identification Number or PIN (4 to 8 digits)
protects your SIM card against unauthorized use. It is
usually supplied with the SIM card.
If you enter an incorrect PIN three times in succession, the
code is disabled and cannot be used until you re-enable it
by entering the PUK (see below).
To
See
enable/disable the PIN
Check feature
change the PIN
PUK
The 8-digit PUK (PIN Unblocking Key) is required to
change a disabled PIN. The PUK may be supplied with the
SIM card. If not, or you have lost it, contact your service
provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK soft
key.
3. When the Confirm New PIN message displays, enter the
same code again and press the OK soft key.
If you enter an incorrect PUK ten times in succession, the
SIM card becomes invalid. Contact your service provider
for a new card.
Access Codes
142
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM cards, is
required to access specific functions, such as setting the
maximum cost of a call. These functions are available if
supported by your SIM card.
If you enter an incorrect PIN2 three times in succession,
the code is disabled and you cannot access the functions
until you re-enable it by entering the PUK2.
(Menu 6.6.7).
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2), supplied with
some SIM cards, is required to change a disabled PIN2. If
you lose the code, contact your service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the OK soft
key.
3. When the Confirm PIN2 message displays, enter the
same code again and press the OK soft key.
If you enter an incorrect PUK2 ten times in succession,
you will not be able to access the functions requiring the
PIN2. Contact your service provider for a new card.
Access Codes
143
Access Codes
144
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on the
safety standards that were developed by independent
scientific organizations through periodic and through
evaluation of scientific studies.
The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of
age and health.
The exposure standard for wireless phones employs a unit
of measurement known as Specific Absorption Rate
(SAR). The SAR limit recommended by the FCC is
1.6W/kg.*
SAR tests are conducted using standard operating
positions specified by the FCC with the phone transmitting
at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone
while operating can be well below the maximum value.
This is because the phone is designed to operate at
*. In the U.S. and Canada, the SAR limit for mobile phones used by the
public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give additional protection for the
public and to account for any variations in measurements.
Health and Safety Information
145
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output
of the phone.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the government-
adopted requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the ear and
worn on the body) as required by the FCC for each model.
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of http:/
/www.fcc.gov/oet/fccid after searching on FCC ID printed
in the label on the phone.
FCC certification information for this model phone is
attached separation paper.
For Body Operation
For body worn operation, this model phone has been
tested and meets the FCC RF exposure guidelines when
used with a Samsung-supplied or approved accessory
designated for this product or when used with and
accessory that contains no metal and that positions the
handset a minimum from the body.
Health and Safety Information
146
The minimum distance for this model phone is written in
the FCC certification information from the body. No
compliance with the above conditions may violate FCC RF
exposure guidelines.
SAR Values
● Head: 1.13 (W/kg)
● Body-worn: 0.433 (W/kg)
For more Information concerning exposure to radio
frequency signals, see the following websites:
Federal Communications Commission (FCC)
http://www.fcc.gov
Cellular Telecommunications Industry Association (CTIA):
http://www.wow-com.com
U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
Precautions When Using Batteries
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
Health and Safety Information
147
• Battery charging time depends on the remaining battery
charge and the type of battery and charger used. The battery
can be charged and discharged hundreds of times, but it will
gradually wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal, it is time to
buy a new battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a
charger is not in use, disconnect it from the power source. Do
not leave the battery connected to a charger for more than a
week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car
in summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
• Do not short-circuit the battery. Accidental short- circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and – terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Dispose of used batteries in accordance with local regulations.
Always recycle. Do not dispose of batteries in a fire.
Health and Safety Information
148
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But
an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features
help you to place your call without taking your attention
off the road.
2. When available, use a hands-free device. If possible,
add an extra layer of convenience and safety to your
wireless phone with one of the many hands-free
accessories available today.
3. Position your wireless phone within easy reach. Be
able to access your wireless phone without removing
your eyes from the road. If you get an incoming call at
an inconvenient time, let your voice mail answer it for
you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice
and even heavy traffic can be hazardous.
Health and Safety Information
149
5. Do not take notes or look up phone numbers while
driving. Jotting down a To Do list or flipping through
your phonebook takes your attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make the people with whom
you are talking aware that you are driving and suspend
conversations that have the potential to divert your
attention from the road.
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic accident
or medical emergencies. Remember, it is a free call on
your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where lives are in
danger, call the emergency number, as you would want
others to do for you.
10.If you see a broken-down vehicle posing no serious
hazard, a broken traffic signal, a minor traffic accident
where no one appears injured, or a vehicle you know to
be stolen, call roadside assistance or any other special
non-emergency wireless number.
Health and Safety Information
150
Operating Environment
Remember to follow any special regulations in force in any
area and always switch your phone off whenever it is
forbidden to use it, or when it may cause interference or
danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety
instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
Health and Safety Information
151
are consistent with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches)
from their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be
able to assist you in obtaining this information. Switch your
phone off in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could be
sensitive to external RF energy.
Health and Safety Information
152
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices
require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of the
need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas),
chemical plants or where blasting operations are in
progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
Health and Safety Information
153
other area where you would normally be advised to turn
off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must
be switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network services
and/or phone features are in use. Check with local service
providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
you may first need to deactivate those features before you
can make an emergency call. Consult this document and
your local cellular service provider.
Health and Safety Information
154
When making an emergency call, remember to give all the
necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air
bag inflates with great force. Do not place objects, including
both installed or portable wireless equipment in the area over
the air bag or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
• Switch your phone off before boarding an aircraft. The use of
wireless phones in aircraft is illegal and may be dangerous to
the aircraft’s operation.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Health and Safety Information
155
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years
• Keep the phone and all its parts and accessories out of the
reach of small children’s.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
•
Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
•
Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone’s electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
Health and Safety Information
156
• Do not paint the phone. Paint can clog the device’s moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
• Use only the supplied or an approved replacement antenna.
Unauthorized antennas or modified accessories may damage
the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
Health and Safety Information
157
Health and Safety Information
158
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full advantage
of the features on your mobile phone, here are a few
definitions.
Active Folder
Ability to answer a call simply by opening the phone.
Call Forwarding
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between the two
calls, as required.
Call Waiting
Ability to inform users that they have an incoming call
when engaged on another call.
GSM (Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various network
operators. GSM covers most European countries and
many other parts of the world.
Line Identification Services (Caller ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
141
Glossary
159
MMS (Multimedia Message Service)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd Generation
Partnership Program (3GPP). For phone users, MMS is
similar to Short Message Service (SMS)-it provides
automatic, immediate delivery of user-created content
from phone to phone. The message addressing used is
primarily phone numbers, thus the traffic goes from phone
to phone. MMS also provides support for e-mail
addressing, so that messages can also be sent by e-mail.
In addition to the text content of SMS, MMS messages can
contain still images, voice or audio clips, and later also
video clips and presentation information.
Multiparty Calling
Ability to establish a conference call involving up to five
additional parties.
Phone Password
Security code used to unlock the phone when you have
selected the option to lock it automatically each time it
switches on.
PIN (Personal Identification Number)
Security code that protects the phone/SIM against
unauthorized use. The PIN is supplied by the service
provider with the SIM card. It may be a four to eight-digit
number and can be changed, as required.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an incorrect
PIN has been entered three times in succession. The
Glossary
160
eight-digit number is supplied by the service provider with
the SIM card.
Roaming
Use of your phone when you are outside your home area
(when traveling for example).
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network provider
and giving access to special services, such as voice mail,
directory inquiries, customer support and emergency
services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information required to
operate the phone (network and memory information, as
well as the subscriber’s personal data). The SIM card fits
into a small slot on the back of the phone and is protected
by the battery.
SMS (Short Message Service)
Network service sending and receiving messages to and
from another subscriber without having to speak to the
correspondent. The message created or received can be
displayed, received, edited or sent.
Soft Keys
Two keys marked and on the phone, the purpose of which:
• varies according to the function that you are currently
using
• is indicated on the bottom line of the display just above the
corresponding key
Dual Band
Glossary
161
Ability to handle any of the following types of network:
GSM 850 and GSM 1900 MHz bands, for greater call
success and wider roaming.
Voice Mail
Computerized answering service that automatically
answers your calls when you are not available, plays a
greeting (optionally in your own voice) and records a
message.
Glossary
162
Appendix A: Certification Information
(SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on
safety standards that were developed by independent
scientific organizations through periodic and thorough
evaluation of scientific studies. The standards include a
substantial safety margin designed to assure the safety of
all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR limit set by the FCC is
1.6 W/kg. SAR Tests are conducted using standard
operating positions accepted by the FCC with the phone
transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum
value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Appendix A: Certification Information (SAR)
163
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the government-
adopted requirement for safe exposure. The tests are
performed in positions and locations(e.g., at the ear and
worn on the body) as required by the FCC for each model.
The highest SAR values for this model phone as reported
to the FCC are Head: 1.13 W/Kg, Body-worn: 0.433 W/Kg.
Body-worn operations are restricted to Samsung-supplied,
approved or none Samsung designated accessories that
have no metal and must provide at least 1.5cm separation
between the device, including its antenna whether
extended or retracted, and the user’s body. None
compliance to the above restrictions may violate FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
A3LSGHP107.
In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kilogram (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for any
variations in measurements.
AppendixA:CertificationInformation(SAR)
164
Appendix B: Guide to Safe and
Responsible Wireless Phone Use
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever make.”
A Guide to Safe and Responsible Wireless
Phone Use
TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY
TAKE ADVANTAGE OF THE UNIQUE COMBINATION OF
CONVENIENCE, SAFETY AND VALUE DELIVERED BY
THE WIRELESS TELEPHONE. QUITE SIMPLY, THE
WIRELESS PHONE GIVES PEOPLE THE POWERFUL
ABILITY TO COMMUNICATE BY VOICE-ALMOST
ANYWHERE, ANYTIME-WITH THE BOSS, WITH A
CLIENT, WITH THE KIDS, WITH EMERGENCY
PERSONNEL OR EVEN WITH THE POLICE. EACH
YEAR, AMERICANS MAKE BILLIONS OF CALLS FROM
THEIR WIRELESS PHONES, AND THE NUMBERS ARE
RAPIDLY GROWING.
But an important responsibility accompanies those
benefits, one that every wireless phone user must uphold.
When driving a car, driving is your first responsibility. A
wireless phone can be an invaluable tool, but good
judgment must be exercised at all times while driving a
motor vehicle-whether on the phone or not.
The basic lessons are ones we all learned as teenagers.
Driving requires alertness, caution and courtesy. It
requires a heavy dose of basic common sense-keep your
head up, keep your eyes on the road, check your mirrors
Appendix B: Guide to Safe and Responsible Wireless Phone Use
165
frequently and watch out for other drivers. It requires
obeying all traffic signs and signals and staying within the
speed limit.
It means using seat belts and requiring other passengers
to do the same.
But with wireless phone use, driving safely means a little
more. This brochure is a call to wireless phone users
everywhere to make safety their first priority when behind
the wheel of a car. Wireless telecommunications is
keeping us in touch, simplifying our lives, protecting us in
emergencies and providing opportunities to help others in
need. When it comes to the use of wireless phones, safety
is your most important call.
Wireless Phone “Safety Tips”
Below are safety tips to follow while driving and using a
wireless phone which should be easy to remember:
1. Get to know your wireless phone and its features such
as speed dial and redial. Carefully read your instruction
manual and learn to take advantage of valuable
features most phones offer, including automatic redial
and memory. Also, work to memorize the phone
keypad so you can use the speed dial function without
taking your attention off the road.
2. When available, use a hands free device. A number of
hands free wireless phone accessories are readily
available today. Whether you choose an installed
mounted device for your wireless phone or a speaker
phone accessory, take advantage of these devices if
available to you.
AppendixB:GuidetoSafeandResponsibleWirelessPhoneUse
166
3. Position your wireless phone within easy reach. Make
sure you place your wireless phone within easy reach
and where you can grab it without removing your eyes
from the road. If you get an incoming call at an
inconvenient time, if possible, let your voice mail
answer it for you.
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are
speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow and ice can be
hazardous, but so is heavy traffic. As a driver, your first
responsibility is to pay attention to the road.
5. Do not take notes or look up phone numbers while
driving. If you are reading an address book or business
card, or writing a “to do” list while driving a car, you are
not watching where you are going. It’s common sense.
Don’t get caught in a dangerous situation because you
are reading or writing and not paying attention to the
road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan your calls before you begin your trip
or attempt to coincide your calls with times you may be
stopped at a stop sign, red light or otherwise stationary.
But if you need to dial while driving, follow this simple
tip-dial only a few numbers, check the road and your
mirrors, then continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Stressful or emotional
Appendix B: Guide to Safe and Responsible Wireless Phone Use
167
conversations and driving do not mix-they are
distracting and even dangerous when you are behind
the wheel of a car. Make people you are talking with
aware you are driving and if necessary, suspend
conversations which have the potential to divert your
attention from the road.
8. Use your wireless phone to call for help. Your wireless
phone is one of the greatest tools you can own to
protect yourself and your family in dangerous
situations-with your phone at your side, help is only
three numbers away. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident,
road hazard or medical emergency. Remember, it is a
free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides you a
perfect opportunity to be a “Good Samaritan” in your
community. If you see an auto accident, crime in
progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as
you would want others to do for you.
10.Call roadside assistance or a special wireless non-
emergency assistance number when necessary.
Certain situations you encounter while driving may
require attention, but are not urgent enough to merit a
call for emergency services. But you still can use your
wireless phone to lend a hand. If you see a broken-
down vehicle posing no serious hazard, a broken traffic
signal, a minor traffic accident where no one appears
injured or a vehicle you know to be stolen, call roadside
AppendixB:GuidetoSafeandResponsibleWirelessPhoneUse
168
assistance or other special non-emergency wireless
number.
Careless, distracted individuals and people driving
irresponsibly represent a hazard to everyone on the road.
Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted
educational outreach to inform wireless phone users of
their responsibilities as safe drivers and good citizens. As
we approach a new century, more and more of us will take
advantage of the benefits of wireless telephones. And, as
we take to the roads, we all have a responsibility to drive
safely.
“The wireless industry reminds you to use your phone
safely when driving.”
Cellular Telecommunications & Internet Association
For more information, please call 1-888-901-SAFE. For
updates:
http://www.wow-com.com/consumer/issues/driving/
articles.cfm?ID=85
Appendix B: Guide to Safe and Responsible Wireless Phone Use
169
AppendixB:GuidetoSafeandResponsibleWirelessPhoneUse
170
Appendix C: Consumer Update on
Wireless Phones
U.S. Food and Drug Administration
1. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called cell, mobile, or
PCS phones. These types of wireless phones can expose
the user to measurable radio frequency energy (RF)
because of the short distance between the phone and the
user s head. These RF exposures are limited by Federal
Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health
and safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is drastically
lower because a person’s RF exposure decreases rapidly
with increasing distance from the source. The so-called
“cordless phones,” which have a base unit connected to
the telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures well
within the FCC’s compliance limits.
2. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range while
being used. They also emit very low levels of RF when in
the stand-by mode. Whereas high levels of RF can
Appendix C: Consumer Update on Wireless Phones
171
produce health effects (by heating tissue), exposure to low
level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level
RF exposures have not found any biological effects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
3. What is FDA’s role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user. In such a case, FDA could require the manufacturers
of wireless phones to notify users of the health hazard and
to repair, replace or recall the phones so that the hazard
no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the following:
Support needed research into possible biological effects
of RF of the type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function; and
AppendixC:ConsumerUpdateonWirelessPhones
172
Cooperate in providing users of wireless phones with the
best possible information on possible effects of wireless
phone use on human health
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information
Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones
with the Federal Communications Commission (FCC). All
phones that are sold in the United States must comply
with FCC safety guidelines that limit RF exposure. FCC
relies on FDA and other health agencies for safety
questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
those they can get from wireless phones. Base stations
are thus not the primary subject of the safety questions
discussed in this document.
Appendix C: Consumer Update on Wireless Phones
173
4. What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program
and with groups of investigators around the world to
ensure that high priority animal studies are conducted to
address important questions about the effects of exposure
to radio frequency energy (RF).
FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
of research needs that has driven the establishment of
new research programs around the world. The Project has
also helped develop a series of public information
documents on EMF issues.
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
5. What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
AppendixC:ConsumerUpdateonWirelessPhones
174
If there is a risk from these products—and at this point we
do not know that there is—it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone
will reduce RF exposure.
If you must conduct extended conversations by wireless
phone every day, you could place more distance between
your body and the source of the RF, since the exposure
level drops off dramatically with distance. For example,
you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected
to a remote antenna
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the
RF exposure from these products, you can use measures
like those described above to reduce your RF exposure
from wireless phone use.
6. What about children using wireless phones?
The scientific evidence does not show a danger to users
of wireless phones, including children and teenagers. If
you want to take steps to lower exposure to radio
frequency energy (RF), the measures described above
would apply to children and teenagers using wireless
phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF
source will reduce RF exposure.
Appendix C: Consumer Update on Wireless Phones
175
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in the
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly precautionary;
it was not based on scientific evidence that any health
hazard exists.
7. Do hands-free kits for wireless phones reduce risks
from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energy in the head because the phone, which is the
source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against
the waist or other part of the body during use, then that
part of the body will absorb more RF energy. Wireless
phones marketed in the U.S. are required to meet safety
requirements regardless of whether they are used against
the head or against the body. Either configuration should
result in compliance with the safety limit.
8. Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
AppendixC:ConsumerUpdateonWirelessPhones
176
believe that accessories that claim to shield the head from
those emissions reduce risks. Some products that claim to
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessory attached to the phone. Studies have shown that
these products generally do not work as advertised. Unlike
“hand-free” kits, these so-called “shields” may interfere
with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal
trade Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users from
radiation with making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable
basis to substantiate their claim.
9. What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI.
FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a voluntary
Appendix C: Consumer Update on Wireless Phones
177
standard sponsored by the Institute of Electrical and
Electronic Engineers (IEEE). This standard specifies test
methods and performance requirements for hearing aids
and wireless phones so that no interference occurs when
a person uses a compatible phone and a compatible
hearing aid at the same time. This standard was approved
by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve the
problem.
10.What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in their
research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures
characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories.
A few animal studies, however, have suggested that low
levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that
showed increased tumor development used animals that
had been genetically engineered or treated with cancer-
causing chemicals so as to be pre-disposed to develop
cancer in the absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under
which people use wireless phones, so we don t know with
certainty what the results of such studies mean for human
health.
AppendixC:ConsumerUpdateonWirelessPhones
178
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, gioma,
meningioma, or acoustic neuroma, tumors of the brain or
salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health
effects from wireless phone RF exposures. However, none
of the studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.
11.What research is needed to decide whether RF
exposure from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal
exposure studies could be completed in a few years.
However, very large numbers of animals would be needed
to provide reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that is
directly applicable to human populations, but 10 or more
years follow-up may be needed to provide answers about
some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing
agent and the time tumors develop - if they do - may be
many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at
which the phone is held, or which model of phone is used.
Appendix C: Consumer Update on Wireless Phones
179
12.Which other federal agencies have responsibilities
related to potential RF health effects?
Additional information on the safety of RF exposures from
various sources can be obtained from the following
organizations.
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
Occupational Safety and Health Administration’s (OSHA):
http://www.osha-slc.gov/SLTC/radiofrequencyradiation/
index.html
National Institute for Occupational Safety and Health
(NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing Radiation
Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
AppendixC:ConsumerUpdateonWirelessPhones
180
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P. (“SAMSUNG”)
warrants to the original purchaser (“Purchaser”) that
SAMSUNG’s Phones and accessories (“Products”) are
free from defects in material and workmanship under
normal use and service for the period commencing upon
the date of purchase and continuing for the following
specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
Other Phone Accessories
90 Days
90 Days
1 Year
What is Not Covered? This Limited Warranty is
conditioned upon proper use of Product by Purchaser.
This Limited Warranty does not cover: (a) defects or
damage resulting from accident, misuse, abuse, neglect,
unusual physical, electrical or electromechanical stress, or
modification of any part of Product, including antenna, or
cosmetic damage; (b) equipment that has the serial
number removed or made illegible; (c) any plastic surfaces
or other externally exposed parts that are scratched or
damaged due to normal use; (d) malfunctions resulting
from the use of Product in conjunction with accessories,
products, or ancillary/peripheral equipment not furnished
or approved by SAMSUNG; (e) defects or damage from
improper testing, operation, maintenance, installation, or
adjustment; (f) installation, maintenance, and service of
Product, or (g) Product used or purchased outside the
Standard Limited Warranty
181
United States or Canada. This Limited Warranty covers
batteries only if battery capacity falls below 80% of rated
capacity or the battery leaks, and this Limited Warranty
does not cover any battery if (i) the battery has been
charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on
the battery are broken or show evidence of tampering, or
(iii) the battery has been used in equipment other than the
SAMSUNG phone for which it is specified.
What are SAMSUNG’s Obligations? During the
applicable warranty period, SAMSUNG will repair or
replace, at SAMSUNG’s sole option, without charge to
Purchaser, any defective component part of Product. To
obtain service under this Limited Warranty, Purchaser
must return Product to an authorized phone service facility
in an adequate container for shipping, accompanied by
Purchaser’s sales receipt or comparable substitute proof
of sale showing the date of purchase, the serial number of
Product and the sellers’ name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG’s sole option, use
rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather
cases, pouches and holsters will be warranted for a period
of ninety (90) days. All other repaired/replaced Product will
be warranted for a period equal to the remainder of the
original Limited Warranty on the original Product or for 90
days, whichever is longer. All replaced parts, components,
boards and equipment shall become the property of
Standard Limited Warranty
182
SAMSUNG. If SAMSUNG determines that any Product is
not covered by this Limited Warranty, Purchaser must pay
all parts, shipping, and labor charges for the repair or
return of such Product.
What Are the Limits On SAMSUNG’s Liability? EXCEPT
AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT “AS IS,” AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE ARE
NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH
RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
♦THE MERCHANTABILITY OF THE PRODUCT OR
ITS FITNESS FOR ANY PARTICULAR PURPOSE OR
USE;
♦WARRANTIES OF TITLE OR NON-INFRINGEMENT;
♦DESIGN, CONDITION, QUALITY, OR
PERFORMANCE OF THE PRODUCT;
♦THE WORKMANSHIP OF THE PRODUCT OR THE
COMPONENTS CONTAINED THEREIN; OR
♦COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL
SHALL BE CONSTRUED TO CREATE AN EXPRESS
WARRANTY OF ANY KIND WHATSOEVER WITH
RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND
Standard Limited Warranty
183
FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY LIMITED TO THE SAME DURATION OF TIME
AS THE EXPRESS WRITTEN WARRANTY STATED
HEREIN. SOME STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND
RESULTING FROM THE PURCHASE, USE, OR MISUSE
OF, OR INABILITY TO USE THE PRODUCT OR ARISING
DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS
OF USE OF THE PRODUCT OR FROM THE BREACH
OF THE EXPRESS WARRANTY, INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS, OR FOR DAMAGES ARISING FROM ANY
TORT (INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG,
ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH
OF CONTRACT OR FOR ANY CLAIM BROUGHT
AGAINST PURCHASER BY ANY OTHER PARTY. SOME
STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL
PURCHASER OF THIS PRODUCT AND STATES
Standard Limited Warranty
184
PURCHASER’S EXCLUSIVE REMEDY. IF ANY
PORTION OF THIS LIMITED WARRANTY IS HELD
ILLEGAL OR UNENFORCEABLE BY REASON OF ANY
LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER
MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG
MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRD-
PARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT IS
INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY
TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE AND
SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE
OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT,
AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG’s
Standard Limited Warranty
185
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty.
The agents, employees, distributors, and dealers of
SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties
binding on SAMSUNG. Accordingly, additional statements
such as dealer advertising or presentation, whether oral or
written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Samsung Telecommunications America, L.P.
1301East Lookout Dr.
Richardson, Texas 75081
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2002 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior
written approval.
Specifications and availability subject to change without
notice.
Standard Limited Warranty
186
Letters
Light
E
Editing
Locking
Lower-case characters
F
G
H
I
M
Memory Status
Memos
Menus
accessing by shortcuts •,
Icons
K
Messages
Key tones
Multiparty calls
Keys
L
Muting
188
N
Names
PIN2
Numbers
R
Redialling
Ring
S
O
P
Password
phone
Phone
Safety
Sending
Setting
care and maintenance •,
Phonebook
SIM card
storing numbers/names •,
PIN
189
SMS
Volume
W
Switching on/off
Waiting
T
Tasks
Text
Time
Tone
U
Upper-case characters
V
190
|